Addfield MP-200 Medical Waste Incinerator Datasheet GA AI
4Pages

{{requestButtons}}

Catalog excerpts

Addfield MP-200 Medical Waste Incinerator Datasheet GA AI - 1

For complete destruction of Medical Pathological (MP) waste. The MP range is specially designed for safely incinerating hazardous high moisture biological red bag waste. QUALITY ASSURED FIRM QUALITY ASSURED FIRM The MP-200 is a small to medium medical waste incinerator. Securely destroying a complete range of Medical, Pathological and Clinical waste. Designed and built along the latest advances in medical incineration. Benefiting from Hot Hearth technology, efficiently recycling heath throughout and below the primary chamber, delivering complete 360° heating. Unrivalled in it’s field boasting a 40% reduction in fuel consumption compared to alternative solutions. The MP-200 is ideally suited for facilities of between 200400 beds and equivalent. Machine Specification External L x W x H (mm) Weight (approx tonnes) Nominal Burn Rate UK* (kg/hr) Burn Rate [Export Only]* (kg/hr) • Heavily insulated internal refractory lining. Constructed from high grade refractory brick ensuring a secure self supporting, interlocking arrangement. • Manually opening, securely locking, access door with viewing port. • Automatic temperature controlled on-off waste ignition burner complete with internal air fans. • Hot Hearth Combustion Burner, temperature controlled on-off, complete with internal air fans. • Secondary combustion burner air fans, automatically controlled distribution to their designated area. • Two temperature sensor mounting points. Secondary Chamber • Fully insulated internal refractory lining. Constructed from high grade refractory brick and low thermal mass insulation. • Secondary chamber burnout burner, temperature controlled on-off complete with internal air fans • Automatically controlled integrated combustion burner air fans. • Temperature sensor mounting point at the base of the exit flue ensuring the chamber reaches the necessary 1100°C minimum Primary Chamber Waste Type Door Aperture Double Pass Fuel Types Control Panel Insulation Board Diesel, LPG, N-Gas 25mm Superwool Grade E23 Fire Brick (Alumina) Treated Waste Anatomical Waste Insulation Fire Brick Clinical Waste Cytotoxic & Cytostatic Waste Offensive/Hygiene Waste *We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said product. Medicinal Waste Domestic (municipal) Waste Addfield Environmental Systems Limited Unit 9 | Zone 4 | Burntwood Business Park Staffordshire | WS7 3XD | United Kingdom © Addfield Environmental Systems Ltd. All information should be used as a guide only, specificati

Open the catalog to page 1
Addfield MP-200 Medical Waste Incinerator Datasheet GA AI - 2

For complete destruction of Medical Pathological (MP) waste. Waste Loading and De-Ashing The MP series of incinerators are ergonomically designed for easy and safe loading of all medical waste streams. Loading through the front facing door can be completed manually or with the aid of a hydraulic lifting table. The MP machines can be loaded multiple times throughout a cycle. At the end of every incineration process, ash should be discharged through the loading door onto the supplied catcher tray prior to being loaded for the next burn. The Addfield Difference • Pre-Fabricated 8mm & 10mm...

Open the catalog to page 2
Addfield MP-200 Medical Waste Incinerator Datasheet GA AI - 3

Last saved date Harjot Bhullar THIS DRAWING AND ALL INFORMATION CONTAINED HEREON IS THE PROPERTY OF ADDFIELD ENVIRONMENTAL SYSTEMS LIMITED, WITHOUT WHOSE PERMISSION IT MAY NOT BE COPIED SHOWN OR OTHERWISE USED AND IT IS TO BE RETURNED PROMPTLY ON REQUEST. Maximum Surface Finish, Unless otherwise stated WHOLE NUMBERS 1 DECIMAL PLACE 2 DECIMAL PLACE ANGLES Tolerances, Unless otherwise stated Drawing Number: Design Approval

Open the catalog to page 3
Addfield MP-200 Medical Waste Incinerator Datasheet GA AI - 4

Addfield Intelligent Controller Simple to operate adaptive control system for achieving optimal results from your machine. Controller Features The Addfield Intelligent Controller has been developed to provide you with a simple yet effective operational process. Designed around a touch screen HMI interface, and independent burner control switches. The touch screen interface provides all of your essential operations at the press of a finger. Having pre-loaded programmes optimised for your individual requirements, waste type and operating regime. Giving you instant access to live...

Open the catalog to page 4

All Addfield Environmental Systems catalogs and technical brochures

  1. RAPID1000

    4 Pages

  2. MINI AB

    3 Pages

  3. MINI

    3 Pages

  4. MINI PLUS

    3 Pages

  5. SB

    3 Pages

  6. TB

    3 Pages

  7. MINI AB AQUA

    4 Pages

  8. THUNDER 500

    3 Pages

  9. MP-500

    3 Pages

  10. GM350

    5 Pages

  11. GM250

    5 Pages

  12. TB-AB PET

    3 Pages

  13. TB PET

    3 Pages

  14. CREMULATOR

    2 Pages

  15. A50-IC (2)

    3 Pages

  16. AES100-2SEC

    5 Pages

  17. LABMASTER 25

    4 Pages

  18. RAPID1000

    6 Pages

  19. TBAB-MAX

    5 Pages

  20. C300

    5 Pages

  21. PetCremation

    6 Pages

  22. MP-100

    8 Pages