COM-CATCH 61 SERIES SQUEEZE CHUTE
12Pages

COM-CATCH 61 SERIES SQUEEZE CHUTE PRODUCT MANUAL

General Description of the Com-Catch 61 Series Squeeze Chute 1 Com-Catch 61 Series Head Gate Assembly 4 Operating the Head Gate 5

PLEASE FOLLOW ALL SAFETY INSTRUCTIONS PROVIDED IN THIS MANUAL BEFORE OPERATION. ARROWQUIP DOES NOT ACCEPT RESPONSIBILITY FOR ANY ACCIDENTS OR INJURY WHEN THIS SAFETY MANUAL HAS NOT BEEN READ IN FULL AND KEPT WITH THE PRODUCT AT ALL TIMES. OPERATORS OF THIS PRODUCT TAKE AND ACCEPT RESPONSIBILTY FOR ANY HARM OR INJURY TO THE ANIMAL OR OPERATOR WHEN IT PERTAINS TO HOW THE EQUIPMENT IS USED AND MAINTAINED. Please keep this manual for frequent reference and to pass on to new users or owners. General Description of the Com-Catch 61 Series Squeeze Chute Com-Catch 61 Series squeeze chute is a...

Safety Precautions PLEASE FOLLOW ALL SAFETY PRECAUTIONS OUTLINED HEREIN. ANY HARM TO THE ANIMAL OR INJURY TO THE OPERATOR WHICH OCCURS DUE TO HOW THE PRODUCT IS OPERATED, OR RESULTING FROM A LACK OF SAFETY PRECAUTIONS ARE THE SOLE RESPONSIBILITY OF THE OPERATOR. All farm machinery and equipment is potentially dangerous. Careless use of any Arrowquip livestock equipment may cause injury or damage to persons, cattle, or property. Arrowquip has taken precautions in the design and manufacturing of this product to ensure that it is safe and user-friendly. Therefore, the user must assume all...

5. DO NOT ALLOW CHILDREN UNDER THE AGE OF 18 NEAR AN OPERATING MACHINE. 6. Follow safe cattle handling procedures in other areas of the yard so that cattle are more docile in the chute. 7. Do not make any modifications to Arrowquip equipment. Non-factory modifications to the equipment can reduce the safety for the operator and livestock. Risk Assessment Conduct a risk assessment on procedures for which the cattle squeeze chute used and establish a safe work procedure. 1. Ensure all users of the equipment have been inducted and comply with safe working procedure. 2. Please ensure that there...

Com-Catch 61 Series Head Gate Assembly Your chute will come with the head gate fully assembled and ready for use. However, if you need to dissemble your head gate for any reason, the following guide will help you to properly reassemble your chute. ASSEMBLING THE COM-CATCH MECHANISM Fit the mechanism parts as shown in the diagram below. 1. COM-CATCH DOOR 2. COM-CATCH ROLLER BOLT 3. TRACK SHAFT 4. COM-CATCH ROLLER 5. LONG HAMMER 6. TOWER CONTROL ARM 7. TOWER SHAFT 8. GREASE NIPPLE 9. SHORT HAMMER 4

Operating the Head Gate REMEMBER SAFETY WHEN OPERATING THE HEAD GATE 1. Ensure all gates and the head gate are closed before the animal 2. Open tail gate for the animal to enter the squeeze chute enclosure. 3. Close tail gate. 4. Open head gate slightly more than the neck size of the animal to tempt the animal to stick its head through the head gate. When neck securely on the animal’s neck. of animal is in the correct position, quickly close the head gate 5. If required, side squeeze animal and engage head restraint to restrain further movement. 6. If the animal applies excessive pulling...

Recommended Maintenance Arrowquip squeeze chutes are made with precision parts and require little maintenance as a result. However, regular maintenance is required to keep your chute running smoothly and safely. 1. Keep grease nipple on main control handle greased. 2. Lubricate slam latches, lube bolts, door hinges regularly with WD-40. Recommended every six months, minimum. 3. Clean bottom head gatedoor track to prevent dirt build-up. 4. Check mechanism pivot bolts for wear and lubricate or replace, as necessary. 5. Clean and lubricate main locking shaft doors regularly. 6. Inspect for...

and other parts contained therein, including, but not limited to, the head gate, locking system, Q-Catch system, and rollers, is null and void. REGISTER FOR WARRANTY NOW: Online: arrowquip.com/product-registration Phone: 1-877-275-6075 | Email: cs@arrowquip.com Troubleshooting Guide If you have a problem with your Com-Catch squeeze chute, please consider the following pointers or call us at 1-877-275-6075. 1. Make sure the head gate and chute are situated on level ground or base. 2. If head gate has minimal use over extended periods, this may cause head gate doors to become stiff to operate...

5. Check for wear of the Com-Catch track shaft. Severe wear may cause friction lock to malfunction. 6. Ensure bolts on the head gateare tightened correctly. a. Too tight will cause the locking and releasing of head gate doors to malfunction. b. Too loose will cause premature wear on head gate parts. c. On the head gate, there is a short hammer and a long hammer between the handle pivot and doors. These two hammers have a slot in them – check that there is free movement for the bolt to move the entire length of this slot, and the lock nuts are correctly tightened. d. The door hammers also...