GDS 3
11Pages

COUPLING SYSTEM FOR HYDRAULICS AND DRIVE SHAFTS IT REALLY CAN BE SO EASY.

Gangl Docking Systems Revolutionize Your Work Processes. flexible With the quick coupling system from Gangl Docking Systems, you can switch your work machines and combine hydraulics and drive shafts in a fully automatic way and without the need to step out of the vehicle. The patented solution enables flexible work steps out in the field, during maintenance and when cleaning.

GDS 3 The principle behind the innovation. Every coupling system is different. Gangl Docking Systems has developed the solution which smoothes out these differences. The GDS 3 is made up of two parts: the coupling module for the traction engine and the counter frame for the work machine. The basic shape is based on the three-point system - a technology which also allows you to perform coupling work on uneven subsurfaces. The GDS 3 thus has a sturdy base in order to automate the technically laborious connections between the traction engine and the work machine. The coupling module The module...

Most work steps start with coupling the required devices to the traction engine. Gangl Docking Systems has revolutionized this central process of agricultural work – and thus the entire way in which you handle your working equipment, the tractor. QUICK AND SIMPLE Save time and effort. Save time and effort with the fully automatic GDS quick coupling system. Stay seated. Until now, to couple working equipment, you required time and physical effort. With the GDS-3-models, this process is fully-automa- safety latch and automatic insertion of the drive shaft. The system thus simplifies what was,...

Valve block GDS 3 hydro Basic frame GDS 3 lock Automatic hook/hydraulic cylinder for hydro plus DS 3 inside plus Internal module extension for master plus

line raction E ngine LOCK AND AUTOMATIC CONNECTION FOR THE HYDRAULICS. AUTOMATIC LOCK AND CONNECTION FOR THE HYDRAULICS.

line raction E ngine DRIVE SHAFT SUPPORT DRIVE SHAFT AUTOMATIC LOCK AND CONNECTION FOR THE HYDRAULICS. THE INTEGRATED DRIVE SHAFT IS INSERTED USING THE LEVER. AUTOMATIC LOCK AND CONNECTION FOR THE HYDRAULICS. THE INTEGRATED DRIVE SHAFT IS INSERTED IN A FULLY-AUTOMATIC PROCESS.

Example of operation with an average of 4 conversion processes per day during a 6-day week (corresponding to 24 conversion processes / week) BENEFIT CALCULATOR Conversions / day 4,00 Coupling / machine in minutes Uncoupling / machine in minutes Working days / week 6,00 Current fuel price in € / l 1,40 Approx. fuel saving in € ca. 728,00 Saving / year € 2.808,00 For an individual calculation, the benefit calculator is available to you at www.ganglsystems.com/calculator G1 PRIMED FRAME FOR VARIABLE MOUNTING ON DEVICES. G2 FRAMES INDIVIDUALLY ADAPTED TO...

FAST AND SIMPLE No matter where the working equipment is situated, you can start up, stay seated and start the coupling process. FLEXIBLE WORK PROCESSES Switch working equipment in just a few seconds - anywhere and at any time. BENEFITS OF THE GDS-3-MODELS The essential features at a glance. FULLY COMPATIBLE 01 COST SAVING Thanks to the optimized work processes, you save valuable time and money with the GDS-3-models. Visit www.ganglsystems.com/ calculator for more information. (just before coupling) Whether it‘s at the front or at the rear - with GDS3 coupling devices is child‘s...

„Every day out on the field was a product test. But at the end of the day, I knew what I still had to improve.” Johann Gang! Media Owner: GDS GmbH Fritz-Knoll-StraBe 3, A-8200 Gleisdorf, Austria Tel.: +43 3112 38 940-0, Fax Extension -90 office@ganglsystems.com Commercial register: FN 379917b, Regional Civil Court of Graz UID: ATU 67224318 Verlags- und Herstellungsort: Graz