R4 Range
12Pages

{{requestButtons}}

Catalog excerpts

R4 Range - 1

Monted reversible ploughs (light weight) from 2 to 5 furrows R 41 | R 4 | RW 4

Open the catalog to page 1
R4 Range - 2

Monted reversible ploughs - light weight Simple, manageable and economic The know-how and experience from Gregoire Besson allows the RANGE R4 to be a light weight and reliable product for all uses. Same architecture as RHAD 115 with reinforced structure : - Thicker sections - Welded cross shaft (optional) 2 tapered roller bearings of the same diameter mechanical inclination adjustment Bolted cross shaft (Various models available) Beam 120 x 120 mm = doubled and modular = possibility of a furrow in the back Doubled up before the penultimate furrow systematic use of spacers Pivot points...

Open the catalog to page 2
R4 Range - 3

Hard conditions. Safety C and C* Safety device type B bolt breaking Shearbolt safety device lignt safety : for easy soil Weight Gain : Setting up 5 + 1 furrows Choice for bolt strenght (90 or 130 kg) Pivot point on the axis of the tip Safety device type Y Exclusivity Gregoire-Besson Mounted on 4 independant pivoting bolts allowing both vertical and lateral movement (Freeing up / down and left / right) Point pressure from 620 kg to 1 600 kg All pins assembled with bushings and grease fitting Mounted with double articulation ground clearance 85 cm Closed under edge: 35 cm Point pressure...

Open the catalog to page 3
R4 Range - 4

Light Monted reversible ploughs Simple, compact and economical Few settings: simplicity and speed. Recommended for fixed wheel centre tractors. Direct link with headstock and beam Adjust offset / elevation-dependent on tractor wheel width : - Offset = width of the first body of work: setting position - True line = alignment: set with mechanical turnbuckle or hydraulic (optional) 4 Direct link = first furrow close to the tractor : - plough easier to lift - easier to return Optional : hydraulic cylinder automatic realignment and turnover Necessary on 5 furrow ploughs Use on lightweight and...

Open the catalog to page 4
R4 Range - 5

Weights and HP requirements only indicative, subject to variations following options and type of soil. Weight given to ploughs equipped with : Between furrow : 90 cm | Security B | Head RHAD 100 | RJL wheel 200 x 14.5 Furrow B2 with moulboard C16S | mixed skimmer

Open the catalog to page 5
R4 Range - 6

Light Monted reversible ploughs Simple and easy to handle with adjustable width Combining versatility and reliability, the range R4 has made the best higher ranges to meet the requirements of users. Link headstock / frame via parallelogram Offset adjustment (width of the 1st furrow- image 2) and alignment (alignment - image 1) 100% = independent adaptation to all tractors Pushes the limits of use of the plough - Very wet contions - Slips off Perfect work even on slopes Perfect ploughing in any condition Ability to partially 'slip' the first furrow Facilitates finishing fields Manual Width...

Open the catalog to page 6
R4 Range - 7

Weights and HP requirements only indicative, subject to variations following options and type of soil. Weight given to ploughs equipped with : Between furrow : 90 cm | Security Y | Head RHAD 100 | DRL 93 wheel 200 x 14.5 Furrow B2 with moulboard H5 | mixed skimmer

Open the catalog to page 7
R4 Range - 8

Light Monted reversible ploughs Adaptability and productivity with variable width With the system varilarge, working width adapts to the needs : Wide for fall tillage, pre-seeding tillage requiring productivity. Narrow for winter tillage, stand ploughing improving water infiltration and frost action. Hydraulic variable working width : - 12 to 20 "adjustable on the move dependant on soil type - Automatic correction of the front furrow when changing the Width Rod double rod outdoor : - ease of maintnance - ease addition / removal of the rear furrow - no constraint on the rod during workl...

Open the catalog to page 8
R4 Range - 9

Weights and HP requirements only indicative, subject to variations following options and type of soil. Weight given to ploughs equipped with : Between furrow : 90 cm | Security Y | Head RHAD 100 | DRL 93 wheel 200 x 14.5 Furrow B2 with moulboard H5 | mixed universel

Open the catalog to page 9
R4 Range - 10

Wheels A full range Wheels choice Gregoire Besson has developed a full range of wheels to meet all needs and adapt its reversible ploughs in all conditions. Choosing a wheel may be based on : - position of - Its function > overflow = minimum lateral > Rear = optimal load transfer Depth control + transport > = coulter depth control > combined = Depth control and transport *Additional optional transport. Depth control

Open the catalog to page 10
R4 Range - 11

Genuine Gregoire-Besson wearing parts the easiest way to achieve high output For its wearing parts, Gregoire-Besson uses the best technologies to reach higher quality. Parts are designed to be easy to pull, to insure penetration and to lead to top of the range ploughing. Reinforced shares Genuine reinforced share, allowing ploughing without point if necessary Reversible landside Landside has 4 positions for an optimal use Landside pad to increase landside long-lasting Point "three holes" Three holes point have four positions (Gregoire-Besson specificity] Easy to pull and less aggressive,...

Open the catalog to page 11

All GREGOIRE BESSON catalogs and technical brochures

  1. VOYAGER C60

    4 Pages

  2. RANGE R6 | R8

    12 Pages

  3. Eurotill

    8 Pages

  4. LD Tine 900

    4 Pages

  5. Plani Series

    8 Pages

  6. Precilitor

    8 Pages

  7. Prima

    2 Pages

  8. R47 | R7 Range

    12 Pages

  9. R6 Range

    8 Pages

  10. SP9 Range

    8 Pages

  11. Spare Parts

    4 Pages

  12. COMBIMIX

    8 Pages

  13. Range Big X

    8 Pages

  14. ANDPAK

    4 Pages