R47 | R7 Range
12Pages

Range R 47 I R 7 Mounted reversible ploughs from 3 to 7 furrows

Mounted reversible ploughs Efficiency, versatility and performance RANGEs R 47 & R 7 The know-how and experience from Gregoire-Besson allows the ranges R7 and R47 to be reliable products, designed for intensive use. Slotted and inclined top link hole Headstock RHAD 115 Standard up to 4 + 1 furrows Shaft Ø 115 mm 2 tapered roller bearings of the same diameter Mechanical inclination adjustment Bolted cross shaft (various models available) Adjustable working width 5 working widthes : 12-14-16-18-20’’ Multi-position element support bracket, mounted on socket / spacer Bolt goes through the...

Modular beam Headstock-to-frame linkage via parallelogram Independent front furrow adjustment 1 mechanical or hydraulic Independent plough alignment 2 • Hydraulic plough alignment with automatic closing during turnover • Mechanical plough alignment Beam Modular beam = possible extension with one rear furrow Beam doubled up to penultimate furrow for more sturdiness Systematic use of spacers Pivot points bushed and greasable Connecting plate in cast steel

Reversible mounted ploughs Efficiency, versatility and performance RANGE R 47 The R47 range is characterized by simple and sturdy design, for optimal versatility. The mechanical adjustment of working width enables the plough to suit different soil conditions and needs. 3 to 5 furrows (to 6 furrows with «C» safety device) Bolted elements Shearbolt safety device «C», «B» or hydraulic auto-reset protection «Y» Frame 120 x 120 mm doubled Shaft Ø 115 mm For tractors from 80 to 180 HP Weights and HP requirements only indicative, subject to variations following options and type of soil. Weights...

Reinforced reversible mounted ploughs Workability, sturdiness and endurance RANGE R7 The R7 range is characterized by simple and sturdy design, for optimal endurance. Combining versatility and reliability, this range is ideal for high work rates. The mechanical adjustment of working width enables to suit different soil conditions and needs. 3 to 6 furrows (to 7 furrows with «C» safety device) Bolted elements Shearbolt safety device «C», «B» or hydraulic auto-reset protection «Y» Frame 150 x 150 mm doubled Shaft Ø 115 mm For tractors from 130 to 300 HP Weights and HP requirements only...

On-land mounted reversible ploughs Very hard conditions, tractors with large tyres or tracked tractors RANGE hrp 7 On-land ploughing enables the use of tractors equipped with large tyres or tracked tractors. These specific tractor equipments ensure a very good adherence to the soil, which enables the use of the plough in extreme conditions. As tillage specialist, Grégoire Besson has developped this range of on-land ploughs to answer all the needs, whatever farm structures and traction powers. • Standard equipment : automatic hydraulic front furrow adjustment and mechanical plough alignment....

Genuine Gregoire-Besson wearing parts The simpliest way to achieve high output For its wearing parts, Gregoire-Besson uses the best technologies to reach higher quality. Parts are designed to be easy to pull, long-lasting, to ensure penetration and lead to top-of-the-range ploughing. Genuine Gregoire-Besson wearing parts : use what you have paid for ! Example : Genuine Gregoire-Besson 3-holes point : “2 Kg purchase, 400g junk, 80% used !” Reinforced share / carbide Genuine reinforced share, allowing ploughing without point where appropriate Large choice to suit all conditions. Short or...

Gregoire-Besson safety devices Hard conditions Safety device type C R 47 Shearbolt • Light safety device, for use in easy soil conditions • Available on range R47 to 6-furrows, and on range R7 to 7-furrows Safety device type B • 2 x shearbolts • Choice of shearbolt strength : 8.8 or 10.9 • One-piece element : prevents from loosening • Pivot point positioned vertically fr

Safety device type Y Auto-reset hydraulic safety device Z Gregoire-Besson exclusivity • Mounted on 4 independent ball bearings allowing both vertical and lateral movement • Point pressure capacity from 620 to 1600 kg • Articulation axle assemblied with grease fitting • Mounted on double linking rods, ground clearance: 85 cm For very hard conditions • Resized interaxle to increase point pressure capacity (700 to 2800 Kg) • Ground clearance: 70 cm Safety device type N Safety device type SI Auto-reset mechanical safety device - by means of compression spring • Point pressure adjustable from...

Gregoire-Besson wheels A full range Choosing a depth wheel Gregoire-Besson has developped a full range of depth wheels to meet all required needs and enable the use of the mounted reversible ploughs in all conditions. Choosing a wheel may depend on: • its position > lateral = minimal overhanging > rear = optimal weight transfer • its function > depth control > combined wheel = depth control + transport Depth control Combined depth control + transport Lateral hydraulic Lateral mechanical *Transport kit as optional equipment

Transport kit (optional equipment)

GRÉGOIRE-BESSON 49230 Montfaucon-Montigné - France Tél. (+33) 2 41 64 72 67 Fax (+33) 2 41 64 67 73 contactfr@gregoirebesson.fr GREGOIRE-BESSON UK LIMITED Spalding Road Bourne Lincs. PE10 0AU - England Tel : 01778 423787 Fax. : 01778 394431 enquiries@gregoire-besson.co.uk GRÉGOIRE-BESSON CANADA INC 4480, Rue Martineau St Hyacinthe (P. Québec) J2R 1V1 - Canada Tel (1) 450 799 56 15 info@gregoirebesson.ca GB.LE.CH.R47.0113.GB.pt - Pictures, weights and technical specifications are only indicative, not binding. GREGOIRE-BESSON GmbH Am Rabewerk 1 D - 49152 Bad Essen - Germany Tel (+49) 5472-771...