Technical data sheet IS 53 Agri
3Pages

{{requestButtons}}

Catalog excerpts

Technical data sheet IS 53 Agri - 1

Transmission Torque converter Self-adjustment speed system based on the required torque and engine speed on each of available gears. Acting only on the accelerator, the speed is set from zero up to the maximum; at the same time, the system reduces the speed providing the necessary torque to overcome the obstacle. When the engine is at the minimum r.p.m., the converter does not transfer the torque to the gearbox, consequently the clutch is not necessary to stop the machine. Powershift gear box with two double clutches Specifically, it is an automatic gear box always geared with two double clutches, one dedicated to reverse gear and the other dedicated to the speed of transfer and working. This gear box permits to use every 4 available gears without the help of the clutch: also when the machine is stopped, in action or in all the working conditions, even under load. Two levers at the wheel drives the gear box, one for advancing and reverse, while the other for adjusting the transfer speed or working speed. Oscillating rear axle Permanent four wheels drive

Open the catalog to page 1
Technical data sheet IS 53 Agri - 2

Electrical system Electrical system at 24 V 2 lead batteries of 75 Ah Alternator 24 V 187.5 A 4.5 Kw Winter thermostarter Hydraulic system Priority service for hydro steering Lifting with free floating position Ergonomic joystick for lift and tilt of arm Driving seat controls for fast attack of implements and for hydraulic locking / unlocking Hydraulic auxiliary line to activate implements, it is controlled by one lever with fourth stable position Thermoregulated hydraulic exchanger Front hydraulic couplings for implements Oil tank with external level indicator Brakes Servo-assisted...

Open the catalog to page 2
Technical data sheet IS 53 Agri - 3

Robust symmetrical arm with parallelogram geometry designed to keep constant the tilt of the tool at different working heights Driving seat controls for fast attack of implements and for hydraulic locking / unlocking Front hydraulic couplings for implements Innovative Ecological Save Solutions Economic iesse s.r.i.s. Via Po, 14 - 44030 - Ro - Ferrara - Italy & (+39) 347 34 19 213 Fax. (+39) 0532 16 73 063 www.iesse.eu iesse@iesse.eu Q iesse sris iesse20i3

Open the catalog to page 3

All IESSE Srl catalogs and technical brochures

  1. IS 53

    3 Pages