P-32 SLUICE GATE
3Pages

{{requestButtons}}

Catalog excerpts

P-32 SLUICE GATE - 1

CIRCULAR OPENING EXTENDED FLANGEBACK P-32 SLUICE GATE • HEAVY DUTY • SELF CONTAINED • MEETS AWWA SPECIFICATIONS* • 60 FOOT SEATING, 20 FOOT UNSEATING PRESSURE • 6" THRU 14" SIZES APPLICATION: Waterman Sluice Gate Model P-32 is ideally suited for pipe end shut-off applications. Commonly used for pumping stations, effluent ponding installations, and distributing boxes. FEATURES: The P-32 Sluice Gate is ruggedly constructed of high strength, close-grained cast grey iron. Stainless steel non-rising stems with 29 degree acme threads are standard. Primarily supplied with 2" square operating nut. Can be furnished with handwheel (as shown) or with alternate lifts as commonly supplied with any other sluice gate. Features of note are: Available in 6" up to 14" opening diameter. Circular opening, circular extended flangeback frame. Bronze seat faces and adjustable wedges. Stainless steel stem, non-rising (standard) and rising (optional). Stainless steel assembly hardware. Circular flangeback mounting, with option of 25 lb. ANSI or 125 lb. ANSI drilling. Designed to accommodate the full range of lift types. * with AWWA approved materials

Open the catalog to page 1
P-32 SLUICE GATE - 2

Frame - Cast Iron Cover - Cast Iron Guide Rails - Cast Iron Wedges - Bronze w/Stn. Stl. Hdwr. Non-Rising Stem Ass'y. 6a Thrust Nut - Bronze 7a Stem - Stn. Stl. 8 Lift Ass'y. - as req'd. Rising Stem Ass'y. 6b Thrust Nut - Bronze 7b Stem - Stn. Stl. 9 10 Stem Guide - Cast Iron 11 Bolt & Nut - Stn. Stl. Non-Rising Stem DIMENSIONS IN INCHES GATE SIZE * Add grout pad thickness if applicable Rising Stem NOTE: FOR PRELIMINARY DESIGN PURPOSES ONLY DO

Open the catalog to page 2
P-32 SLUICE GATE - 3

TYPICAL SPECIFICATIONS P-32 SLUICE GATE The following specifications for Waterman Heavy Duty P-32 Sluice Gates are presented as an aid to the engineer and can be augmented with additional information to meet specific needs. SCOPE Each gate shall be furnished and installed complete with wall thimble or anchor bolts or studs, operating stem, gate lift operator and other appurtenances as specified or needed to make a complete and operable installation. GENERAL Gates, stems, lifts and other appurtenances shall be the size, type, material and construction as shown on the drawings and specified...

Open the catalog to page 3

All Waterman Industries catalogs and technical brochures

  1. STOP GATES

    3 Pages

  2. AWWA C561

    28 Pages

  3. AWWA C560

    24 Pages

  4. H-30

    3 Pages

  5. F-55

    3 Pages

  6. VBG

    3 Pages