Kataloge >
AGCO GmbH >
FENDT SQUARE BALERS Equipment variants and technical details

FENDT SQUARE BALERS Equipment variants and technical details
1 / 1Seiten

Katalogauszüge

FENDT SQUARE BALERS Equipment variants and technical details - 1

Standard and optional equipment Standard: g Optional: c FENDT SQUARE BALERS Equipment variants and technical details. 990 Width Height Max. length Bale size Weights and dimensions Overall width - single/tandem axle (including pickup wheels)* Overall width - tyres 620/40x22.5* Overall length - bale chute, folded in Overall height - to top of hand railing, folded in Overall height - to top of hand railing, standing Weight - single/tandem axle, without cutter unit Weight - tandem axle, with cutter unit ProCut table ProCut table Cutter Hydraulic cutter protection Cutting rotor diameter Group engagement of knives Potential cutting length Pull-out knife drawer Plunger / bale chamber Plunger speed Piston stroke Automatic bale density control Knotting system / tying Main drive Flywheel diameter Flywheel width Flywheel weight Overload protection - slip clutch, overrunning clutch and shear bolt Gearbox - enclosed, double reduction Automatic chain lubrication Double knotter Knotter Twine reserve (reels) Cleaning fan with hydraulic drive Automatic knotter lubrication Number Number Bale ejector and bale chute Pickup Overall width - without pickup wheels Effective operating width (DIN 11220) Tine rows Tines Tine spacing Drive protection - slip and overrunning clutches HD spiral spring Roller pressure pad with deflector plate Feeding system Packer - fork design Packer tines (hardened) Overload protection - slip clutch with splined profile Number Number Teeth Tine rows that can be switched on/off Hydraulic controls at rear of baler Heavy-duty bale chute Eject indicator Hydraulic pivoting system for road transport Axles and tyres Single axle - tyres* Single axle - max. permissible speed* Tandem axle - tyres (standard)* Tandem axle - tyres (optional)* Tandem axle - max. permissible speed* Operation / control and monitoring system C1000 - colour terminal ISOBUS - compliant with ISOBUS 11783 Tractor requirements Recommended PTO power - packer version Recommended PTO power - ProCut cutter unit PTO - type II: PTO diameter: 35 mm, 21 teeth PTO - type III: PTO diameter: 44 mm, 20 teeth Dual-action control valve, depending on specification (min.) The best bale size The bale size you need depends on what the bale will be used for. Fendt offers four different bales sizes to meet all needs. The top model 12130 N is especially well-suited for dry crops. With a bale size of 120 cm to 130 cm, it meets the requirements of modern straw burning systems. The models 990 S, 1270 S and 1290 S are equipped with an additional cutter unit and are therefore ideal for silage. Bale size 1270 (WxHxL) Bale size 1290 (WxHxL) Bale size 12130 (WxHxL) Special equipment Integrated bale scales Electrical bale length adjustment Hydraulic support leg Rear view camera Integrated moisture measurement HayBoss preservative applicator * = sold according to legislation Bale size 990 (WxHxL) kW/hp kW/hp

Katalog auf Seite 1 öffnen