Units 1 & 2, Acorn Business Centre, Oaks Drive, Newmarket, Suffolk, CB8 7SY, United Kingdom T: 0044 (0)1638 731212 F: 0044 (0)1638 731174 E: [email protected] W: www.atlagri.com Variable Speed Milk Pump Control The new ATL Variable Speed Milk Pump Control is designed to make milk pumping more efficient and milk cooling more effective. The system controls the milk pump to ensure that milk is pumped through the plate cooler at a slow, constant speed. This ensures the plate cooler can extract as much heat out of the milk as possible before it reaches the bulk tank. Therefore, reducing the energy consumption and costs of cooling the milk in the bulktank. Additionally, the system preserves the milk quality by eliminating a start and stop process with slow, gentle and continual transportation of the milk.

• System uses multi-level float that provides up to 24 different speeds during milking. • Variable Speed Milk Pump Control allows more efficient pre-cooling of the milk. • The milk pump will switch on at a slow speed when the milk is at a low level in the receiver. • The speed will only increase if the milk level in the receiver increases to a higher level. • During washing the milk pump runs at its maximum speed. • Not all 24 speeds can be used as it depends upon the size of the receiver and where the top sensor is set during setup. • The milk cools faster due to a constant flow rate through...