Kataloge >
Big Dutchman >
RainMaker pad cooling system

RainMaker pad cooling system
1 / 4Seiten

Katalogauszüge

RainMaker The ideal cooling system for poultry houses with tunnel ventilation

The efficient evaporative cooling system for your poultry house RainMaker is a pad cooling system developed by Big Dutchman that features a clever and unique frame system. Its main benefits include: 4 efficient cooling of the barn, 4 minimum installation requirements and 4 asy monitoring and maintenance. e The system uses evaporation to cool barns and is therefore mainly installed in climate regions with hot and dry summers. The higher the temperature and the lower the relative humidity, the higher the cooling effect. ✔ ompact structure and fixed pump c position; ✔ lastic pads with a much...

Katalog auf Seite 2 öffnen

Unique frame system with top profile and pad holder The core part of the frame system is the top profile, i.e. the entire upper part of the frame. Water flows through the top profile onto the pads below. 4 top profile is designed as an open the system, i.e. the water flow is always visible to detect clogging easily and there is no hiding place for birds and rodents; 4 special deflector ensures that water is the evenly and widely spread on both the front and the back of the pads for ideal wetting; 4 n integrated roof prevents bird droppings a from falling onto the pads for high...

Katalog auf Seite 3 öffnen

Tunnel or CombiTunnel ventilation with RainMaker When using RainMaker, we recommend offsetting the pads from the walls with a corridor or “dog-house”. Air inlets in the walls can then be kept much smaller. This has the following advantages: 4 required air speed can be precisely the adjusted, which leads to a better air distribution in the barn, especially wide ones; 4 barn can be sealed airtight by means of the a roller curtain, fresh air shutters or tunnel doors; 4 ood protection against wind and rain g overall; 4 ervice and maintenance tasks can be s performed irrespective of whether...

Katalog auf Seite 4 öffnen