SILAGE KING ENGINEERED FOR SILAGE
1 / 8Seiten

SILAGE KING ENGINEERED FOR SILAGE

It's Good to be King The Silage King is built on the same rock-solid foundation that Degelman is known for, and includes features that will significantly improve how you push silage. With our new streamlined design, this blade pushes silage with less horsepower, while maximizing the approach angle - allowing you to push the silage up where it belongs.

Designed for Silage The Silage King with silage extension comes in at 75" tall - the tallest dozer blade in the industry. The curvature has been slightly flattened out from the 7900 in order to prevent the blade from holding on to excess material, allowing for even distribution. With more height, and less curvature, you can push more silage with less horsepower. Silage Light Kit Ready Reversible Cutting Edge With mounting holes in the center of the cutting edge, simply flip it over and you are ready to go with a brand new edge. With 1-5/8” of wear per side, you can push twice as long with...

SLEEK NEW DESIGN Simple and Effective The sleek new design of the Silage King keeps silage flowing where it belongs. We've redesigned the lower third of the blade and removed the cutting edge frogs, allowing silage to flow smooth and evenly underneath the cutting edge. We’ve also updated the skid shoe to a cast mushroom style, making this component much easier to replace. Adjustments to the skid shoe are easy with the continuously variable ratchet jack - just like the well known 7900 series blade. DESIGNED FOR EFFICIENCY TO SAVE YOU TIME & MONEY Quick Blade Attach System Newly Designed Bell...

Quickly Transition to Narrow Transport Customers asked - Degelman delivered. Certain areas limit the transport width of machinery to 14’ on the highway. Our all new design features a swinging 1’ extension system that keeps the blade within transport restrictions, without sacrificing valuable blade width. This unique hinge design allows for a quick and easy transition to narrow transport mode, and features an integrated hook and receiver on the rear of the blade. Simply remove the extension bolts, swing it back, and the blade is ready for transport. Reduced Overhang for Better Control In...

APPROACH ANGLE A Unique Approach When working with large amounts of silage, approach angle is key. When we designed the Silage King, we reduced the lift height, brought the blade closer to the tractor, and kept the approach angle at 25 degrees. This helps you push the silage up at a greater angle, making the most out of your space in the silage pit. Degelman’s Radial Lift Approach Competitor’s Parallel Lift Approach vs. When an adjustment needs to be made by the operator, fast blade response time is necessary. The Degelman Silage King is mounted with only one pivot point, making the...

ENGINEERED TOUGH www.degelman.com