2900
1 / 6Seiten

Katalogauszüge

Mechanical joystick This series of economic joysticks, made of aluminum, is suitable for agricultural application such as front loaders. Thanks to its modular construction, it can be configured for any application’s requirements like clockwise or counter clockwise with respect to cable movements. It is available with maximum 7 push buttons, either high current and low current. stroke: +/–14 mm • Cable Lever ratio on lever’s length): either 6,5:1 • Lever angle:(depending +/–23° • FLEXBALL I T A L I A N A WR CONTROLS GROUP

Katalog auf Seite 1 öffnen

LOCK LEVER POSITION It is possible to mount the lock lever on each of the 4 sides of the base of the joystick 2900. Right side Rear side Left side Front side HANDLE AND PUSH BUTTONS The handle of joystick 2900 can have up to 7 push buttons, either high current and low current, according to the table here below. Electrical cable standard length is 2 meter. Push-button high current (4 A) FLEXBALL I T A L I A N A WR CONTROLS GROUP

Katalog auf Seite 2 öffnen

SPECIAL CUSTOM PROJECTS STICK LENGTH BLOCK LEVER define the product and the joystick version: DDDD = 2900 standard version B defines the lock lever position: B = 1 right side B = 2 rear side B = 3 left side B = 4 front side L defines the length of the stick: L = 0 no stick L = 1 for L = 310 mm L = 2 for customized length K defines the type of handle (for the handles please refer to chapter 7): K = 0 without handle K = 1 handle type 1705 (standard) K = 2 handle type 1710 (anatomic) K = 3 handle type 1715 (rear) K = 4 handle type 1721 (rear grey) K = 5 handle type 1720 (rear...

Katalog auf Seite 3 öffnen

end fittings are • The represented with the cable LEVER SIDE PUSH-PULL CABLES WHICH FIT WITH JOYSTICK 2800 AND 2900 Cable type E3, code 00341100-mmmmm 30 code 00741100*mmmmm Cable type 07E, Cable 01041100-mmmmm 82 type 017, code 16 Cable type 017, code 0175940-mmmmm FLEXBALL I T A L I A N A WR CONTROLS GROUP HYDRAULIC DISTRIBUTOR SIDE Cable type E3, code 0035730-mmmmm

Katalog auf Seite 4 öffnen

CONNECTING KITS It is available a wide range of adaptation kits to connect our control cables to the majority of the hydraulic distributors available on the market. Push-pull cable with hub M16x1.5 and rod M6 Nut M16x1.5 Flange Aluminum connection to the hydraulic distributor Pin (for full description refer to next page) Connection to the hydraulic distributor spool (for full description refer to next page) Aluminium flange Aluminium connection tube Imin Imax FLEXBALL I T A L I A N A WR CONTROLS GROUP

Katalog auf Seite 5 öffnen

Push-pull cable with hub M16x1.5 and rod M6 Nut M16x1.5 Locking nut M22x1,5 Cut insert Connection with integrated flange Connection to the hydraulic distributor spool Pin Flange with 2 holes Flage with 4 holes Imin Imax Connection to the valve spool Connection to the spool Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 info@flexballitaliana.com www.flexballitaliana.com

Katalog auf Seite 6 öffnen