Kataloge >
GSI Group >
VERSALOOP TM

VERSALOOP TM
1 / 4Seiten

Katalogauszüge

ROUND TUBE CHAIN CONVEYOR MAXIMUM VERSATILITY

MAXIMUM VERSATILITY GSI's most versatile and adaptable conveyance product, VersaLoop's chain and paddle design moves grain quietly and efficiently at capacities a traditional auger cannot match, with less wear, maintenance, and grain damage. VersaLoop is also capable of longer unsupported free spans than traditional chain and flight conveyors, and can eliminate the need for costly support structures such as catwalks or towers. Available in 8", 10", and 12" tube diameters Capacities from 4,000 to 10,000 BPH Maximum length of 325' (99.06 m) Inclines up to 60° to load taller bins UHMW paddle...

Katalog auf Seite 2 öffnen

Direct-Drive Conﬁguration Easy Maintenance Commercial-style direct-drive oﬀers reduced maintenance versus traditional belt driven conﬁgurations. Drive end can be located at ground level*, allowing easy access for maintenance, and promoting worker's safety. Bend Section Inlet and Discharge Options Allows feeding into a horizontal section, which can then bend upwards where space allows. From simple side-feed inlets to adjustable drive-over hoppers with grating, a range of inlet options are available to ﬁt any application. Fit larger equipment underneath dryer discharges or hopper tank...

Katalog auf Seite 3 öffnen

For full product specs, scan the QR Code below VersaLoop specifications listed are based on dry, free flowing grain. Maximum Length Allowance indicates longest possible length for each drive size and conveyor diameter at the given incline. Exceeding these maxima will result in motor overheating/over-amp conditions, decreased gearbox lifetime, plug conditions and possible damage to equipment. Maximum Free Span Allowance indicates the maximum distance allowed between support points on the conveyor. VersaLoop is designed so that limited supports are required, however the table above must be...

Katalog auf Seite 4 öffnen