Hydro-Mix XT-EX
1 / 4Seiten

Digital Microwave Moisture Sensor for Hazardous Dust Environments Hydro-Mix XT-EX GRAIN • FEED • NUTS • GRANULES • LI

Hydro-Mix XT-EX Flush mount, digital microwave moisture sensor for installation into explosive dust environments The Hydro-Mix XT-EX has been designed to measure moisture in flowing bulk solids such as animal feed, grain, rice, pulses and also in liquids. The sensor can be easily installed in ducting, conveying and mixing systems. It is suitable for Zone 20 process environments (Zone 21 external to process). Comprising a single, intelligent unit that contains all on-board functionality including signal processing and averaging, the Hydro-Mix XT-EX precisely measures the moisture content of...

Installation The electrical cable of this sensor has to be terminated outside of Installation Wall or Floor the protected area or within a suitable housing that complies with the relevant protection zone. All connections within the protection zone must be made with the power supply isolated. Hydro-Mix XT-EX Hydro-Mix XT-EX Fixing Plate Typical Installation into Mixers, Conveyors and Dryer Outlets The Hydro-Mix XT-EX can be mounted in many different locations where there is a continuous flow of material across the ceramic faceplate. These include hoppers, ducting, conveyors and mixer systems....

Technical Information Construction Analogue Outputs Integrated Cable Faceplate: Ceramic. source available for moisture and temperature. May Screen braid with 65% minimum coverage plus Body: 316 Stainless Steel. Internal Seals: EPDM FDA Approved O-Rings. Fixing Plate O-Ring: EPDM FDA Approved Fixing The sensor is flush mounted with the internal wall of the installation using the included mounting assembly. Measurement Range Moisture: 0-100%, material dependant. Depth: Approx. 75-100mm, material dependant. Measurement Modes Choice of modes for optimising sensor performance Temperature Two...