M150 & M200 Self-Propelled Windrower
1 / 197Seiten

PARTS CATALOG Revision C Part #169016 $15

L/H - left hand I Left/Right Hand js cfetenrrin^ from REF - reference, part number called up elsewhere in catalog R/H - right hand | Operator's pos^on, feeing forward with nc - national coarse thread ^tractor in Cab Forward position. nf - national fine thread I.D. - inside diameter RHSN - round head, square neck O.D. - outside diameter NSS - not sold separately A/R - as required (quantity varies) SERIAL NUMBER BREAKS The side of the serial number on which the dash (-) appears determines whether the part is used "up to" or "after’ the serial number given. Example: -162249...

BOLDED PART NUMBERS INDICATE REVISIONS OR ADDITIONS SINCE LAST PRODUCTION YEAR. Form # 169016 / 169300 / 169301

12 WALKING BEAM LESS EXTENSIONS

14 WALKING BEAM EXTENSIONS

24 DRIVE WHEELS AND TIRES B4633 SHOWN

DRIVE WHEELS AND TIRES REF PART NUMBER SERIAL NUMBER See note 1 NUT - FLANGE SMOOTH FACE 5/8 NF GR 8 ZP 1. Kits available through Wholegoods only. 2. Kits B4370, B2994 and B2989 are no longer available through Wholegoods. Individual service items remain available as service parts.

28 LIFT LINKAGE (Continued)

LIFT LINKAGE (Continued) REF PART NUMBER SERIAL NUMBER Quantities are 1 for M200 and 2 For M150 For units with serial # 185859 and below, order slave cylinder 112931 (item 39). If stock of 112931 is depleted, kit will be substituted. This kit consists of new slave cylinder 166191 (item 53), support (item 54) and hardware. NUT - HEX DT .750-10UNC BOLT - HH 3/8 NC X 5.5 LG GR 5 ZP BOLT - HH WELDT WASHER-SHOULDER, NYLON NUT - HEX 3/8 - 16 UNC GR 5 ZP WASHER - HARDENED WASHER - SAE FLAT 13/32 ID X 13/16 IN OD ZP WASHER - REG. LOCK 3/8 IN. NOM. ID ZP NUT-HEX LOCK DT 3/8-16 UNC ZP BOLT - RHSN 3/8...

SERIAL NUMBER HYDRAULIC CENTER LINK MECHANICAL CENTER LINK Kits available through Whole Goods only NUT-HEX LOCK DT 1/4-20 UNC ZP BOLT - HH 3/4 NC X 5.5 LG GR 5 ZP NUT - HEX 3/4 - 10 UNC GR 5 ZP NUT - HEX DT .750-10UNC BOLT - RHSN 3/8 NC X 1.25 LG GR 5 ZP NUT - FLANGE DT SMOOTH FACE 0.375-16UNC WASHER - SAE FLAT 13/32 ID X 13/16 IN OD ZP BOLT - HH 3/8 NC X 5.5 LG GR 5 ZP WASHER-SHOULDER, NYLON BOLT-RHSSN 3/8 NC X 0.75 LG GR 5 ZP BOLT - HH 5/8 NC X 3.5 LG GR 5 ZP BOLT - HH 3/8 NC X 2.25 LG GR 5 ZP BOLT - HH 1.0 NC X 4.0 LG GR 5 ZP NUT - HEX LOCK DT 1.0-8UNC BOLT - HH 1/4 NC X 1.5 LG GR 5 ZP...

40 TANKS (FUEL + HYDRAULIC)

64 CAB – SEALS GROMMETS MOUNTS AND UPHOLSTERY

PART NUMBER SERIAL NUMBER BEACON KIT, includes items 20-22 plus hardware H 2 Beacons per kit. Kits available through Whole Goods only BOLT - HH M8 X 1.25 X 20 LG ZP BOLT - HH FLG (SERR FACE) 3/8 NC X 0.75 GR 5 ZP NUT - HEX 3/8 - 16 UNC GR 5 ZP BOLT-HEX HD 1/4 NC X 1.0 LG GR 5 ZP WASHER - REG. LOCK 1/4 IN. NOM. ID ZP NUT - HEX 1/4 - 20 UNC GR 5 ZP NUT - HEX 1/4 - 20 UNC GR 5 ZP NUT-HEX LOCK DT 1/4-20 UNC ZP NUT - FLANGE DT SMOOTH FACE 0.375-16UNC

74 HVAC - ENGINE GROUP (M150)

76 HVAC - ENGINE GROUP (M200)

78 STEERING COLUMN AND SEAT BASE

80 STEERING COLUMN AND SEAT BASE (Continued)

Contact your dealer for information regarding software updates to the electronic modules. Your dealer will have the necessary interface tools and access to the latest software upgrades. Form # 169016 / 169300 / 169301

86 GROUND SPEED LEVER AND CABLE

88 GROUND SPEED LEVER AND CABLE (Continued)

90 STEERING & GROUND SPEED CONTROL (UNDER CAB)

92 NEUTRAL INTERLOCK AND PINTLE ARMS (M150)

94 NEUTRAL INTERLOCK AND PINTLE ARMS (M200)

98 TRACTION DRIVE PUMPS

100 TRACTION DRIVE PUMP REPAIR PARTS

102 HEADER DRIVE PUMP ASSEMBLIES

HEADER DRIVE PUMP ASSEMBLIES REF 1 2 3 PART NUMBER SERIAL NUMBER NUT- SLOTTED JAM 1.0 IN - 20 UNEF - ZN PL BOLT - HEX HD 3/8 NC X 1.0 LG GR 5 ZP BOLT - HH 1/2 NC X 1.5 LG GR 5 ZP WASHER - REG. LOCK 3/8 IN. NOM. ID ZP WASHER - REG. LOCK 1/2 IN. NOM. ID ZP WASHER- HARDENED BOLT – HH 3/8 NC X 1.5 LG GR 5 ZP BOLT – HH 1/2 NC X 1.25 LG GR 5 ZP

104 KNIFE DRIVE PUMP (M150)

106 REEL AND CONVEYOR PUMP (M150)

HEADER DRIVE PUMP - 1st TANDEM (M200)

HEADER DRIVE PUMP - 1 TANDEM (M200) PART NUMBER SERIAL NUMBER SEAL KIT – includes listed items marked * plus non-listed items marked “SK” in illustration

HEADER DRIVE PUMP – 2nd TANDEM (M200)

HEADER DRIVE PUMP – 2 PART NUMBER SERIAL NUMBER

112 DRIVE WHEEL MOTOR ASSEMBLY

PART NUMBER DRIVE WHEEL MOTOR ASSEMBLY DESCRIPTION MOTOR - DRIVE (3 SPD BONDIOLI), all M200. For M150 see Ser. No See pages 114 - 119 for motor service parts FITTING - elbow hydraulic, qty. 2 for M150 S.N. 195759 and below ... NUT-HEX LOCK DT 5/8-11 UNC ZP BOLT - HH 5/8 NC X 1.75 LG GR5 ZP NUT - HEX LOCK DT .750-10UNC BOLT - HH 3/4 NC X 2.25 LG GR 5 ZP NUT - FLANGE SMOOTH FACE 5/8 NF GR 8 ZP WASHER - HARDENED BOLT - HEX HD .750-1L UNF X 2.75 BOLT - HH FLG (SERR FACE) 1/2 NC X 1.25 GR 5 ZP (Bonfiglioli Powerwheel) BOLT - HH 1/2 NC X 2.00 GR 8 ZP (Auburn Gear Powerwheel) WASHER — FLAT ,...

114 WHEEL DRIVE MOTOR

116 WHEEL DRIVE MOTOR (Continued)

WHEEL DRIVE MOTOR (Continued) REF PART NUMBER SERIAL NUMBER M150 quantities shown are for serial no. 195759 and below. For serial no. 195760 and above, M150 quantities are same as M200.

118 WHEEL DRIVE MOTOR (Continued)

120 FINAL DRIVE PLANETARY (WHEEL DRIVES) - BONFIGLIOLI DRIVE IDENTIFICATION - BONFIGLIOLI

122 MODEL 8B POWER WHEEL – AUBURN GEAR DRIVE IDENTIFICATION – AUBURN GEAR Form # 169016 / 169300 / 169301

124 HEADER LIFT MANIFOLD

126 HEADER DRIVE MANIFOLDS (M150) ITEMS 22 & 31 REVERSED ON 2007 AND PRIOR UNITS ITEMS 19 & 21 REVERSED ON 2007 AND PRIOR UNITS

128 HEADER DRIVE BLOCK (M200)

NOTE: ORB fittings include O-ring on ORB thread

132 DRAPER HEADER REEL HYDRAULICS

138 TRACTION DRIVE & LIFT HYDRAULICS

PART NUMBER TRACTION DRIVE & LIFT HYDRAULICS DESCRIPTION SERIAL NUMBER 19965 BOLT - RHSN 3/8 NC X 1.0 GR 5 ZP 30228 NUT - FLANGE DT SMOOTH FACE 0.375-16UNC 1. Units with serial numbers 181999 and prior, use a qty of 2 unless fitting (item 26) is already installed.

140 TRACTION CHARGE, CENTER LINK, INTERLOCK & SERVO