HYDRAULIC HOSES TECHNICAL CATALOGUE
1 / 16Seiten

WORKING PRESSURE [BAR] HOSE SIZE Page MINIMUM BENDING RADIUS [mm] HOSE SIZE Page

APPLICABLE SPECS HOSE STRUCTURE WIRE BRAIDED WIRE SPIRALLED

EN853 1SN/SAE100 R1AT Low-medium pressure line, including mobile, machine tool and agricultural application, using petroleum or water-based hydraulic fluids TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size EN857 1SC - COMPACT Hose has compact dimensions and tighter bend radius in machinery applications. Low-medium pressure line with...

EN853 2SN/SAE100 R2AT Medium-high pressure line, including construction, machine tool and agricultural application, using petroleum or water-based hydraulic fluids TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: Two high tensile steel braid WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size EN857 2SC - COMPACT High-pressure service with tight bends for petroleum and water based hydraulic fluids, with excellent impulse...

1SN PREMIUM – EXCEED EN853 1SN Low-medium pressure line, including mobile, machine tool and agricultural application, using petroleum or water-based hydraulic fluids. Comparing to regular 1SN, it has lighter weight, higher working pressure and half the bending radius. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid SMOOTH COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size 2SN PREMIUM – EXCEED EN853...

EN853 2SN AGRO LINE 2SN hose design specifically for agricultural machinery TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: Two high tensile steel braid WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size SAE 100 R16 Medium-high pressure service with tight bends for petroleum and water based fluids where maximum abrasion resistance is required, with excellent impulse performance and flexibility. TEMPERATURE: -40°C to...

SAE 100 R17 Medium-pressure hydraulic applications, where higher pressure and a more flexible hose is required. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: One high tensile steel braid (DN6-10) Two high tensile steel braids (DN12-25) WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size SAE 100 R5 Low-medium pressure line, general purpose applications. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to...

JACK HOSE Very high pressure hydraulic line – 520 to 700 bar. Compact, high pressure, light weight, high abrasion resistance and low change in length for use with petroleum, synthetic or water based fluids in hydraulic system. Mainly used for rescue, safety equipment, bolt tensioning tools and jacking & re-railing equipment. Also, suitable for earthmoving and material handling equipments. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: Two high tensile steel braid SMOOTH COVER: Synthetic rubber with...

PRESSURE WASHER HOSE II For medium pressure cleaning application with hot water. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +150°C for pressure washer only INNER TUBE: synthetic rubber REINFORCEMENT: Two high tensile steel braid SMOOTH COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size WATER BLASTING HOSE Very high pressure hose for water scaling and jetting system TEMPERATURE: -40°C to 100°C (-40°F to +212°F), intermittent use to +125°C (+257°F) INNER TUBE: synthetic rubber REINFORCEMENT: four...

Impulse tested over 1000000 cycles without leakage Very high-pressure applications used for petroleum based hydraulic fluids. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: four high tensile steel spiral WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size Impulse tested over 1000000 cycles without leakage Very high-pressure applications used for petroleum based hydraulic fluids. TEMPERATURE: -40°C to 100°C (-40°F to +212°F), INNER TUBE: Oil resistant...

Impulse tested over 1000000 cycles without leakage Very high-pressure applications used for petroleum based hydraulic fluids. TEMPERATURE: -40°C to 121°C (-40°F to +250°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: four high tensile steel spiral WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size Impulse tested over 1000000 cycles without leakage Very high-pressure applications subject to surge or flexing such as construction equipment, mining and the high performance industrial market....

Impulse tested over 1000000 cycles without leakage Designed specifically to handle severe high pressure applications where pressure or constant hydrostatic loads are present. TEMPERATURE: -40°C to 121°C (-40°F to +250°F) INNER TUBE: Oil resistant synthetic rubber REINFORCEMENT: four high tensile steel spiral (DN19-25) Six high tensile steel spiral (DN31-51) WRAPPED COVER: Synthetic rubber with high abrasion, ozone and weather resistance. MSHA: fire resistance with MSHA approval Hose Size