Kataloge >
PETKUS Technologie GmbH >
Dust Extraction System

Dust Extraction System
1 / 2Seiten

Katalogauszüge

Dust Extraction System for Intake Pits The purpose of the PETKUS Dust Extraction System for Intake Pits is Construction: to minimize the dust during the filling of the intake pits. The Dust Extraction System for the Intake Pits is installed in modules. Every module is equipped with a fan and exhaust silencer for aspirating Advantages: the air. Bag filters made of polyester clean the air inside the module. Individual and independent modules The modules can be extended from 8 m to 18 m. Optionally extendable Large filter areas with high airflow Standard Equipment: Immediate installation on or next to the intake pit Bolted housing made of galvanized sheet steel A dust collection system is not required Fan with exhaust silencer Description: The dusty air which is created during grain unloading is aspirated by Options: the fans of the intake pit Dust Extraction System. A bag filter separates Model in galvanized sheet steel the dust and the cleaned air is returned into the room. The bag filter is cleaned with compressed air and the dust is guided to the intake pit. Therefore, a dust collection system is not required. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E

Katalog auf Seite 1 öffnen

Dust Extraction System for Intake Pits Size of one modul: 2 m (optional 500 or 1 000 mm) Pressure for pneumatical filter cleaning: 6-7 bar Intake pit aspiration system Length Air volume Filter area Electrical power fan Electrical power, inclusive compressor Air pressure volume Electrical power, compressor Technical alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-m

Katalog auf Seite 2 öffnen

Dust Extraction System 1 / 2Seiten

Katalogauszüge

Alle Kataloge und technischen Broschüren von PETKUS Technologie GmbH

Dust Extraction System
1 / 2Seiten