Kataloge >
PETKUS Technologie GmbH >
Troughed Chain Conveyor Type TK 400 / TK 520

Troughed Chain Conveyor Type TK 400 / TK 520
1 / 2Seiten

Katalogauszüge

Troughed Chain Conveyor Type TK 400 / TK 520 - 1

Troughed Chain Conveyor Type TK 400 / TK 520 The purpose of the PETKUS Trough Chain Conveyor TK 400 / TK 520 Construction: is the horizontal transport of free flowing, bulky products such as The trough chain conveyor is equipped with conveyor troughs, a conveyor chain, inlets and outlets as well as the drive and the tengrain, pulses, oilseeds and similar agricultural products. sioning station. The drive is operated with a gear motor. Advantages: Positioning of the inlets and outlets freely configurable Standard Equipment: Modular design through duct lengths of 500 mm, 1000 mm, Screwed conveyor troughs with a roof of galvanized sheet 2000 mm and 3000 mm steel Large conveying distances of up to 70 m Drive station with electric motor Quiet, low-wear operation due to plastic guiding rails Tensioning Station One inlet Description: Model for the unidirectional transport of products The transport of the product is usually performed from the tensioning station to the drive station. The product is transported into the trough chain conveyor over the Options: Manual, pneumatic or motorized intermediate outlets inlet. A conveyor chain with paddles moves the material along the Outlet hopper for the tensioning station circular bottom of the conveyor trough to the outlet. Model for the reversible transport of products The conveyor chain is driven by a sprocket by the drive station. The Model for the double-sided transport of products conveying belt is tensioned on the opposite side by the tensioning Device for transporting the product back station. PETKUS Technologie GmbH | Röberstraße 8 | D-99848 Wutha-Farnroda | Germany | Tel.:+49(0)36921-98

Katalog auf Seite 1 öffnen