Kataloge >
Pfanzelt Maschinenbau GmbH >
Recovery winch MySelf

Recovery winch MySelf
1 / 2Seiten

Katalogauszüge

Recovery winch MySelf Both in agriculture and forestry, as well as in environmental care, a winch is often needed to recover vehicles or equipment. The front recovery winch MYSELF was designed exactly for this purpose. A hydraulically controlled cable winch of a simple construction for the quick coupling triangle. This means that, in the event of a rescue operation, it is installed and removed in no time at all.

Katalog auf Seite 1 öffnen

Aggregates and vehicle winches Front winch MySelf Pulling force of lower cable layer Pulling force of upper cable layer Worm gear unit in oil bath Special forestry cable, highly compacted Coupling for quick cable pull-out Average rope speed at 80 l/min Shield width Weight (incl. rope) BW 0105 for front polder shield 50 kN 35 kN • 12 mm dia. x 50 m Jaw clutch 10.1 m/ min 1,600 mm approx. 1.000 kg • Standard o Option - Not deliverable Start your configuration now. configurator.pfanzelt.com To be observed: To determine the optimum cable length, deduct 10 % from the maximum rope capacity....

Katalog auf Seite 2 öffnen