CoMeo
1 / 16Seiten

User Guide Original User Guide

COMEO IN LINE - USER'S GUIDE - EU TABLE OF CONTENTS GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. OBEY THE LEGAL REGULATIONS AND THE APPLICABLE RULES! . . . . . . . . . . . . . . . . . 6. INFORMATION ABOUT THE RESIDUAL RISKS - USED SAFETY SIGNS . . . . . . . . . . . . . . 10. THE LEVEL OF NOISE EMISSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11. LOCK OUT TAG OUT – LOCK METHOD GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12....

Disclaimer The original, authoritative version of this manual is the English version produced by ROXELL BV. Subsequent changes to any manual made by any third party have not been reviewed nor authenticated by Roxell. Such changes may include, but are not limited to, translation into languages other than English, and additions to or deletions from the original content. Roxell disclaims responsibility for any and all damages, injuries, warranty claims and/or any other claims associated with such changes, in as much as such changes result in content that is different from the authoritative...

– General information General information IMPORTANT: These instructions must be read, understood and all points observed by the user, the responsible and operating personnel. Obey the legal regulations and the applicable rules This concerns, among other things, the European regulations and directives transposed into national legislation and/or the laws, safety and accident prevention regulations that apply in the user's country. During assembly, operation and maintenance of the installation the legal regulations concerned and the applicable technical rules must be obeyed. The installation...

– General information Technically trained person An expert who can assemble and maintain the installation (mechanically/electrically), and resolve malfunctions. On the basis of his/her technical training and experience, he/she has sufficient knowledge to be able to assess activities, recognize possible dangers and rectify dangerous situations. Put all parts to be assembled in a room or at a location where the not yet assembled components are protected against weather influences. Depending on the size of the parts and according to local circumstances and local legislation, the parts of the...

– General information LOTOTO = Lock Out - Tag Out - Try Out Before you begin: Everyone needs his own lock and tag (label), which can’t be removed by other persons. Inform all the persons who are influenced by the procedure. Localize all sources of energy (electric, hydraulic, pneumatic). Switch off. Take the relevant installation or process out of operation and lock it against reuse. You can do this by placing a padlock or other blocking mechanism (Lock Out). To mark Attach a sign, label or sticker to the padlock or blocking mechanism to reveal the nature and the expected duration of the...

– General information Information about the residual risks - used safety signs There are three levels of danger, which you can recognize from the following signal words: • DANGER • WARNING • CAUTION The nature and source of the imminent danger and possible consequences of not obeying warnings is stated here! Symbol Meaning DANGER indicates a direct imminent danger that can result in a serious or even fatal accident if the safety measures are not respected. WARNING indicates a possible imminent danger that can result in a serious accident or damage to the product if the safety measures are...

GENERAL SAFETY RULES Minimax/HaïKoo/Comeo Automatisch pannen voedersysteem voor vleestkuikens Automatic pan feeding system for broilers Winching systeem Liersysteem voor voer- en drinklijnen Winching system for feed- and drink lines IMPORTANT DANGER Carefully read the following instructions before USING the system 1. Before you do any repair, or maintenance works, always disconnect the electricity supply. 2. Ensure you wear personal protection equipment (gloves, dust masks). 3. The system starts automatically. Never use your hands at dangerous locations (feed intake boots, drive units,...

OPERATOR’S GUIDE For floor feeding - from day-old chicks to broilers. AVOID FEED WASTAGE = ADJUST FEEDER HEIGHT EASY START open feed windows COMEO IN LINE - USER'S GUIDE - EU closed feed windows pans full automatic operation of control pan (FIXED/MOVABLE INTERMEDIATE) CONTROL PAN (for partial brooding) AVOID DRAUGHTS AVOID DARKNESS SUPPORT FOR HOPPER IN LINE = THE MOST USED PAN CHECK THE SUSPENSIONS OF THE 100 KG HOPPER AND THE CONTROL UNIT AFTER HEATING UP THE BUILDING. BOTH SUSPENSIONS MUST BE WELL STRETCHED.

CLEANING * The last day : run the tubes empty and let the birds empty the pans as much as possible. * Remove possible feed residues by turning the pans a couple of times 180 degrees around the tubes or by removing the pans from the 12 fin supports. * Protect electrical components against water. * Clean the whole system by means of a high- pressure cleaner (max. 100 Bar). * When using aggressive detergents or disinfectants consult your supplier. OPTION COMEO WITH CLEANING OPTION

COMEO IN LINE - USER'S GUIDE - EU ACTIONS IN GREY BACKGROUND MUST BE DONE BY A TECHNICALLY TRAINED PERSON. 1. Power unit - Make fan dust-free - Check possible damages to electrical wiring 2. Poultry intake boot with sensor - Check sensor 3. 100kg hopper (lines) - Check level switch 4. Suspension X - Check operation of (central) winch - Check operation of (central) winch. Grease after cleaning. X - Check connection of cable X - Check connection of pulleys X - Check suspension of tubes and motors X - Keep suspension cord/cable in tension 5. Poultry perch cable above the tubes/elbows - Check...

TROUBLE SHOOTING GUIDE Switch off the main switch first. Use personal protective equipment. DANGER ACTIONS IN GREY BACKGROUND MUST BE DONE BY A TECHNICALLY TRAINED PERSON. CORRECTIVE ACTION 1.None of the feeder No current. lines run. Defective time clock. Time clock not properly set. 2.One/more lines do Wires from motor damaged. not run. Pans are empty Motor protection switched off. Defective sensor/minimum switch control unit or 100kg hopper. Oil on auger overloads the motor. 3.Motor is often overloaded. Not enough current supply to the motors. 5.Tubes / boot wear rapidly, much noise when...