Kataloge >
Valmetal >
VM-250

VM-250
1 / 4Seiten

Zu meinen Favoriten hinzufügen

Katalogauszüge

CENTER-CHARGE FEEDER

Katalog auf Seite 1 öffnen

THE ULTIMATE IN SIMPLICITY, THIS SHUTTLE FEEDER HAS BEEN DELIVERING DEPENDABILITY FOR OVER 60 YEARS. Getting your cows fed is one job that just can’t wait. The Valmetal VM-250 feeder is a proven performer, trusted by generations of dairymen to deliver feed with maximum reliability. Feeders up to 250 feet long run on only 2 HP, making the feeder the most energy efﬁcient choice while the quiet operation is appreciated by cows and owners alike. THE ENCLOSED HOOD PROTECTS FEED FROM WIND OR RAIN. THE HANGER BRACKETS ARE EASY TO INSTALL AND MAY BE SUPPORTED FROM STANDARD 1-5/8” OD STEEL PIPE, 2X6...

Katalog auf Seite 2 öffnen

HOW IT WORKS... Feed passes through the center inlet in the hood sections onto the trolley and is carried forward by the movement of the trolley pan under the stationary belt. The rack-and-pinion drive for the trolley is simple and dependable. The drive sprocket teeth engage the carriage track for positive no-slip power. The drive is protected by a slip clutch. Double drive tracks are standard on feeders over 150 feet long. OPTIONAL WIND DOWNSPOUTS FOR OUTDOOR FEED BUNKS. The non-powered belt runs at low tension, meaning long life and easy maintenance.

Katalog auf Seite 3 öffnen

SPECIFICATIONS BELT WIDTH MAXIMUM LENGTH MAIN DRIVE Belt & Chain 2-stage drive BELT SPEED FEEDER PLOW DRIVE/FEEDER DRIVE Non-powered Full length Rack & pinion Speciﬁcations, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without prior notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment. YOUR LOCAL DEALER: 230, Boulevard industriel Saint-Germain-de-Grantham (Québec) J0C 1K0 Canada Tel : 819 395-4282 Fax : 819 395-2030 15497 State Hwy 131...

Katalog auf Seite 4 öffnen