A-250 ALUMINUM
1 / 6Seiten

SLIDE GATE • TYPE 6061 T-6 ALUMINUM WITH UHMW PLASTIC SLIDING AND SEATING • MEETS LEAKAGE REQUIREMENTS OF Corrosion Resistant Optimum Sealing Against Leakage Rugged Heavy Duty Design A-250-1 Series Slide Gates are engineered for excellent sealing while providing maximum resistance to corrosion. Ultra High Molecular Weight Polyethylene (UHMW) sliding and seating surfaces, dissimilar from the gate slide material, provides low coefficient of friction while maintaining the superior resistance to corrosion. A-250-1 Series Slide Gates can be custom designed for 5, 10, 15 or 20 feet of head (some limitations apply to larger sizes). A-250-1 gates are available in normal aperture configurations or as weirs (downward opening). They may also be ordered as self-contained gates or with extension stems and separate Also available: SS-250-1 Series Stainless Steel Slide Gates.

TYPICAL SPECIFICATIONS FOR A-250-1 SERIES FABRICATED SLIDE GATE GENERAL The gates shall be either self-contained with yoke and bench stand operators, or non-self-contained with separate stem guides and operator, in accordance with the requirements of these specifications. Specific configurations shall be as noted on the gate schedule or as shown on the plans. FRAME AND GUIDES The gate frame shall be a rigid unit composed of aluminum guide rails with UHMW seats upstream and downstream. These shall form a tight seal between the frame and the slide (disc). This tight seal shall provide an...

SIDE SECTION INVERT SECTION NOTE: FOR PRELIMINARY DESIGN PURPOSES ONLY UNLESS PART OF CERTIFIED & APPROVED SUBMITTAL

INVERT SECTION NOTE: FOR PRELIMINARY DESIGN PURPOSES ONLY UNLESS PART OF CERTIFIED & APPROVED SUBMITTAL

INVERT SECTION INVERT SECTION SIDE SECTION NOTE: FOR PRELIMINARY DESIGN PURPOSES ONLY UNLESS PART OF CERTIFIED & APPROVED SUBMITTAL

INVERT SECTION SIDE SECTION INVERT SECTION NOTE: FOR PRELIMINARY DESIGN PURPOSES ONLY UNLESS PART OF CERTIFIED & APPROVED SUBMITTAL