FP series
1 / 9Páginas

PANEL SWITCHES FP series Fully illuminated pushbutton switches • bushing Ø 26 mm • momentary or latching DISTINCTIVE FEATURES Snap-in mounting Full actuator or symbol illumination Large but lightweight Pad printed or laser etched symbols ENVIRONMENTAL SPECIFICATIONS • Front panel sealing : IP54 according to IEC 60529 with panel gasket and 2 mm panel thickness • Operating temperature : -40 °C to +75 °C (-40 °F to +167°F) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : - silver contacts (code 2) : 4 A 12 VDC - gold plated contacts (code 4) : 200 mA 12 VDC • Initial contact resistance : 50 mΩ max. • Insulation resistance : 1 GΩ min. at 500 VDC • Dielectric strength : 1,000 Vrms 50 Hz min. • Electrical life at full load : - Momentary models : 1 million cycles (gold plated contacts) 400,000 cycles (silver contacts) - Latching models : 200,000 cycles LED COMPONENT SPECIFICATIONS LED color Forward current A resistor must be series-connected by the user Resistor value = supply voltage - LED forward voltage The company reserves the right to change specificat

Fully illuminated pushbutton switches • bushing Ø 26 mm • momentary or latching PANEL CUT-OUT GENERAL SPECIFICATIONS • Panel thickness : 1.5 (.059) to 2 mm (.078) with panel gasket 2 (.078) to 2.5 mm (.885) without panel gasket. • Total travel : 2.5 mm ± 0.5 mm • Typical operating force : 8 N ± 2 N • Low level or mechanical life : - Momentary models : 1 million cycles - Latching models : 200,000 cycles WIRING DIAGRAM • Contacts : silver (code 2) or silver, gold plated (code 4) APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. PANEL SWITCHES

Fully illuminated pushbutton switches • bushing Ø 26 mm • momentary or latching BUILD YOUR PART NUMBER BASIC PART NUMBER ELECTRICAL FUNCTIONS Round, flat Round, curved Round, curved, flush Solder lugs Independent, 1 pole, dimming LED (Function 1 only) Output indicator, 1 pole (Function 1 only, cable only) ACTUATOR COLORS BEZEL COLORS Silver, gold plated ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to the...

Fully illuminated pushbutton switches • bushing Ø 26 mm • momentary or latching LATCHING Curved actuator Flat actuator MOMENTARY (NO) Curved actuator Flat actuator PANEL SWITCHES LED CONTROL AND NUMBER OF POLES Complete the model numbers on previous pages with one of the following codes. Function 1 (latching) Non-illuminated one pole A Output indicator, one pole Cable only F dotted line = jumper to be wired by the user. LED- has to be wired to one pin of pole 2. FICHIER: CFP30SH-P4 ECHELLE: 0.625 indice A le 03/03/2014 Independent one pole Dimming LED E FICHIER: CFPSH-P5 ECHELLE: 0.625...

Fully illuminated pushbutton switches • bushing Ø 26 mm • momentary or latching CONTACT MATERIALS BASIC P/N Silver Silver, gold plated ACTUATOR COLORS BASIC P/N Blue Black Green Grey Yellow Red White/natural Orange BEZEL COLORS BASIC P/N Blue Black Green Grey Yellow Red White/natural LED COLORS BASIC P/N Non-illuminated Blue Green Red Yellow Red/green Red/blue LED RESISTOR BASIC P/N No resistor supplied 12 VDC resistor 24 VDC resistor 15 VDC resistor 30 VDC resistor 5 PANEL SWITCHES

PANEL SWITCHES FP series Fully illuminated pushbutton switches • bushing Ø 26 mm • momentary or latching MARKING BASIC P/N No marking Black pad printing White pad printing Laser SYMBOLS BASIC P/N Available symbols Complete the enlarged box with the one of the codes listed on the following pages. Marking color White marking for illuminated actuators (laser etching) and non-illuminated black actuators (pad printing). Black marking for non-illuminated color actuators (pad printing). Other : on request. Marking area The symbol will be included in the hatched area. MARKING AREA FLAT Ø (.6 16 30...

PANEL SWITCHES FP range Symbols for fully illuminated pushbutton switches Most symbols meet the ISO 7000 standard “graphical symbols for use on equipment” (code given in bracket in the description). Contact us for symbols not featured in the following tables. Revolving light Emergency first aid vehicle (2565) Rear ventilator Door opening Windshield demister/ defroster (0635) Combine, direction of movement (1678) Working spot light (1145) Side mirror defroster Restarting pump Down motion Taxi sign light (2551) Propulsion system trim Working light symmetric (1204) Traveller lighting

PANEL SWITCHES FP range Symbols for fully illuminated pushbutton switches Engine idle control ECAS reset Cruise res/set Driver windows heating Driver windows up/ down Middle door opening Front door opening Read lighting Lighting in baggage room Lighting main switch Rear window wiper (0097) Cruise on/off Heating using water Rear window washer (0099) Position lights Diesel acceleration Toilet decontamination Manual mode Front windshield heating Clockwise cabin rotation Anticlockwise cabin rotation Rockshaft down Remove retarder Restricted speed Brake release Baggage room left door ECAS...

Symbols for fully illuminated pushbutton switches Battery charging condition (0247) Differential lock, bogie (2600) Brushing with a rotating brush (0070) Differential lock, transfer case 4x4 (2475) Loader bucket, float (1441) Rear window washer & wiper (0098) Header, Header drive (1579) Excavator/backhoe boom side shift (2091) Chemical water treatment (1851) Legend scale Depending on space available on the product (see “Symbols” section at the end of each series). Grapple skidder, single funct° boom (1762) PANEL SWITCHES