Catálogos >
APEM GmbH >
Q16 series

Q16 series
1 / 8Páginas

Extractos del catálogo

Q16 series Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations Available in RGB ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating & Storage Temperature Range: Rear plastic body: -30 ° C to +65° C ( –22 °F to +149 °F) Rear epoxy body: -40 ° C to +85° C ( –40 °F to +185 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 30–100° (dependant on model) • Life Expectancy: 100,000 hours • Torque: 75 cNm • Maximum panel thickness 11 mm • Insulation resistance : 4,000 MΩ at 500 VDC MATERIALS • Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal

Abrir la página 1 del catálogo

Ø16 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Operating Voltage Operating Current (Min to Max) Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Recessed Forward Voltage HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Forward Voltage *...

Abrir la página 2 del catálogo

Ø16 mm panel mount LED indicators BUILD YOUR PART NUMBER BEZEL STYLE MOUNTING HOLE Rear epoxy Pins Rear epoxy wires Short body pins Short body wires Blue White Orange Hyper bright Red Super bright blue Hyper bright green Hyper bright yellow Super bright white Hyper bright orange Super bright green Red/yellow/ green Super bright yellow Red/Green/ Blue* * Terminals option 5 and common anode only Bright chrome Satin grey BEZEL FINISH Fixed light CUSTOM OPTIONS Common cathode Common anode ** please refer to the forward voltage in electrical specifications ABOUT THIS SERIES Notice: please note...

Abrir la página 3 del catálogo

Q16 series Ø16 mm panel mount LED indicators PROMINENT BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Abrir la página 4 del catálogo

Ø16 mm panel mount LED indicators FLUSH BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Abrir la página 5 del catálogo

Q16 series Ø16 mm panel mount LED indicators RECESSED BEZEL SOLDER LUG/FASTON REAR EPOXY WIRES REAR EPOXY PINS SHORT BODY WIRES SHORT BODY PINS

Abrir la página 6 del catálogo

Ø16 mm panel mount LED indicators CUSTOM ENGRAVING Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied. Suffix the part number with legend code :

Abrir la página 7 del catálogo

Q16 series Ø16 mm panel mount LED indicators SECRET UNTIL LIT POLYCARBONATE INSERTS Some common codes are listed above, for your custom requirements please contact APEM. Please note Secret until lit inserts only available with flush metal bezel (Option F) Suffix the part number with legend code : CABLE LENGTH AND CONNECTOR For custom cable length and connectors contact APEM.

Abrir la página 8 del catálogo