Tray Washer
1 / 4Páginas

Products & Solutions for forest nurseries

integrated stainless steel filter system transparent windows to monitor operation the high pressure unit and hot water unit provides for an effective and clean result non-corrosive stainless steel construction The BCC Tray Washer consists of two parts i.e. a high-pressure unit for mechanical cleaning and a hot water washer section for thermal disinfection. This combination ensures effective removal of mineral particles, organic and inorganic components and biological contaminants from used trays. During the processes of containerised plant production and infield planting, trays are...

Out feed: In a stand-alone Tray Washer, trays are fed out of the hot water section and stacked manually for later use. In an integrated line, trays are pushed are onto a conveyor belt which feeds the tray filler. Note! Trays that are filled with waste substrate due to poor germination or rooting success need to be manually pre-cleaned before washing. 30 low pressure nozzles on 5 spray bars ensure complete flushing of trays OPERATIONAL BENEFITS & KEY FEATURES • • • • • Pneumatic feeding of trays through the Tray Washer. Non-corrosive stainless steel construction. Integrated safety features....

TECHNICAL DATA In feed Pusher Dimensions (L x W x H): 1300mm x 800mm x 1150mm Weight: 60kg Power supply: Regulated from high pressure section Compressed air consumption: 300 litres/minute at 600kPa (6Bar) High Pressure Section Dimensions (L x W x H): 1300mm x 1000mm x 1600mm Power supply: 3 x 400V, 50Hz Power requirement: 8 kW Water consumption: 80 litres/minute at 500kPa (5Bar) Maximum production capacity: HIKO (350mm x 216mm, fixed tray): 24 trays/minute SideSlit (385mm x 385mm, fixed tray): 13 trays/minute 96 Insert Frame (517mm x 350mm, single cell tray): 10 trays/minute Hot Water...