a anne ValeEel air vale J Controlled fruit thinning

Eclairvale® is a new machine developed using patent n° EP 2677856, validated in 26 countries, which allows the thinning of fruit trees from blossoming to the young fruit stage. Attached to a tractor, it has a freely rotating rotor onto which semi-rigid rods are attached. Its rotation occurs through the penetration of the rods into the vegetation and the advancement of the tractor, which induces a slow rotation and rubbing of the rods against the branches, which causes some of the flowers or fruit to fall. This mode of action is a breakthrough innovation as the plant is neither hit nor shaken,...

Hydraulic opening of the folding deoice Brush diameter: 3 metres

The brush penetrates the tree and does not go beyond the tractor The phenological stage The driving mode The penetration of the rods into the tree The forward speed of the tractor Eclairvale® EH For the EH model, a jack set in the vertical beam makes it possible to work on trees 5 metres high or to work exclusively on the upper part of the orchard. The Eclairvale® is tilted using the hydraulic jack of the tractor lift. The offset jack allows: —► Working on the left or on the right Regulation of the penetration of the rods

The rotation of the brush occurs through the contact of the rods in the tree and the movement of the tractor. The absence of motorisation makes it possible to continuously adjust the rotation speed by means of the forward speed, which allows the tree and the fruit to be preserved. The rod does not hit the tree or the fruit. Eclairvale® works predominantly through the action of the rods rubbing against the flowers or fruit. APRICOT / PLUM / PEACH Retaining spring: Protects and facilitates the exchange of the rod Retaining spring: Protects and facilitates the exchange of the rod Soft over-moulding...

1/ Replacement cf a complete red with spring using the Mahita screwdriver Use the screwdriver position and always set it to speed 1, and never exceed the tightening torque of 17, otherwise the thread of the rotor may be damaged. Always use the largeT30Torx bit supplied with the machine. Using the original tapped hole n° 1: Thread the screw into the original tapped hole with the above settings. Using the spare hole n°2: If the thread of hole n° 1 is damaged, use spare hole n° 2 by lubricating the screw with WD40 for example. The lubrication is important to give the screwdriver sufficient torque...

Scientific references The performance of Eclairvale® has been evaluated by numerous research centres, the reports are available on the site www.lacannevale.fr A significant time saving was observed on the apricot varieties Apriqueencov (+/-47%) and FlopriaC0V (+/-37%). No marks on the fruit during the operation. Rapport d'activites 2019- Office d'arboriculture et cultures maraicheres P.29 (in French) In the context (peach and apricot) in which it is operated, the machine has on average reduced by 40% the load initial flowering and, while requiring a manual finishing on the fruit, led to a significant...

We can also adapt the machine to your orchard, do not hesitate to consult us. All spare parts are in stock at your distributor. You receive a 5-year manufacturer's warranty on the entire structure (according to the warranty certificate). A financing offer tailored to your needs may be offered to you. 30 rue Fabre d'Eglantine -11100 NARBONNE - France -Tel.: + 33(0)4 68 58 86 01 - Email: [email protected]