Model 8530 Finisholl Operators Manual
1 / 186Páginas

Model 8530 Finisholl Operators Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-756-0321

Manuals for the 8530 Finisholl MANUAL NUMBER MANUAL NAME 8530 Finisholl Operator’s Manual 8530 Finisholl Parts Manual

Introduction and Safety Information Understanding Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Decal Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transporting Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attaching, Detaching, and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance Safety . . . . . . . . . . . . . . . ....

Leveling (Front-to-Rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Depth Stop Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Disc Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Disc Gang Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Disc Gang Assembly . . . . . . . . . . . . . . . . . . . . ....

Introduction and Safety Information Introduction The Landoll Model 8530 Finisholl is a quality product designed to give years of trouble free performance. By following each section of this manual, your system will perform as designed for you and your operation. CHAPTER 1 Gives basic instructions on the use of this manual and understanding the safety statements. Gives product specifications for the equipment. These specifications supply lengths and measures for your equipment. A Standard Bolt Torque Table is provided to give guidelines for bolt torques to be used when servicing this product....

INTRODUCTION AND SAFETY INFORMATION Understanding Safety Statements You will find various types of safety information on the following pages and on the machine signs (decals) attached to the vehicle. This section explains their meaning. The Safety Alert Symbol means ATTENTION! YOUR SAFETY IS INVOLVED! NOTE Means that failure to follow these instructions could cause damage to the equipment or cause it to operate improperly. NOTICE Special notice - read and thoroughly understand Caution means serious equipment or other property damage can occur if instructions on this label are not properly...

INTRODUCTION AND SAFETY INFORMATION 6. Attach the safety chain to the tractor recommended drawbar support. Provide only enough slack in the chain for turning. Do not attach the safety chain to an intermediate support. Safety chain must have rating greater than the gross weight of the towed implement(s). Replace the safety chain if it is worn or damaged in any way. 7. Verify that all hydraulic hoses and electrical wiring between the tractor and implement are safely routed to avoid damage. 8. Check implement tire pressure for correct inflation. Verify that lug nuts are properly torqued before...

INTRODUCTION AND SAFETY INFORMATION Tire Safety Safety Chain 1. Tire changing can be dangerous and should be performed by trained personnel using correct tools and equipment. 2. When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side, not in front of or over the tire assembly. Use a safety cage if available. 3. When removing and installing wheels use wheel-handling equipment adequate for the weight involved. 1. Use a chain with a strength rating equal to or greater than the gross weight of towed machinery, which is 10,100 pounds minimum in...

Standard Specifications Model Specifications 8530 Finisholl Model Number Working Width Transport Width Transport Height Number of Shanks Shanks per Section Tire Size Spindle Size Wheel Bolt Pattern 3” Center 3” Center Frame, Frame, 2-1/4” Wings 2-1/4” Wings 8 Bolt Wheels NOTE: Specifications Are Subject To Change Without Prior Notification Tire Inflation Tire Size Tire Manufacturer Ply/Load Rating Specific Bolt Torques Lug Bolts & Nuts 9/16-18 Lug Bolts & Nuts (Heavy Duty Disc) 5/8-18 Lug Bolts & Nuts (Heavy Duty Disc) Disc Gang Shafts

STANDARD SPECIFICATIONS General Torque Specifications (rev. 4/97) TORQUE SPECIFIED IN FOOT POUNDS - This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition). They do not apply if special graphite moly-disulfide or other extreme pressure lubricants are used. When fasteners are dry (solvent cleaned) add 33% to as received condition torque. Bolt head identification marks indicate grade and may vary...

STANDARD SPECIFICATIONS Hydraulic Fitting Torque Specifications TORQUE IS SPECIFIED IN FOOT POUNDS- 37o JIC, ORS, & ORB (REV. 10/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition). They do not apply if special graphite moly-disulfide or other extreme pressure lubricants are used. When fasteners are dry (solvent cleaned) add 33% to as received condition torque. Bolt head identification...

STANDARD SPECIFICATIONS Figure 2-1: Shank and Light Bracket Placement - 19’ (Left Half)

STANDARD SPECIFICATIONS Figure 2-2: Shank and Light Bracket Placement - 19’ (Right Half)

STANDARD SPECIFICATIONS Figure 2-3: Shank and Light Bracket Placement - 22’ & 25’ (Left Half)

STANDARD SPECIFICATIONS Figure 2-4: Shank and Light Bracket Placement - 22’ & 25’ (Right Half)