Catálogos >
Majar >
Flail Mower RBML

Flail Mower RBML
1 / 2Páginas

Extractos del catálogo

MAJMR Polyvalent Crushing 15 - 45 HP Flail mower RBML 100/115/130/155Microtractor 15 - 45 HP with power grip 540 tr/min Working width 100, 115, 130 and 155 cm Attelage arriere 3 points cat.1 Delivered with cardan shaft Gearbox with freewheel 3 positions offset, 0 - 5 - 10 cm Y - knives width 40 mm thickness 5 mm Cutting height adjustable from -1.5 to 11cm depending on knife type (Y, hammer, paddles or scarificator). The advantages : Substantial fuel savings due to the rotor design Rotor with helical position: even drive without effort for optimal crush. Big rotor tube : cutting rigidity and inertia, electronic balancing after assembly of knives. Reduced energy consumption and CO2-emission High rotation speed: rotation 2500 tr/min, cutting speed of 42m/s for a perfect cut and crush System to avoid grass jam: no risk of grass winding around the roll Curved chassis: the chassis form and the particular disposition of the back roll optimize the ventilation, ejection and self-cleaning of the roll Armoured sheet thickness 3 mm on model 155 Large opening: allows to swallow the vegetation without flatten Drive: 2 trapezoidal belts, adjustable tension can be controlled easily Security, ergonomic: lateral deflectors adjustable, front flaps anti-projection, lifting eye in the centre of gravity for handling Lubrication accessible without disassembly. Bearing and lubrificators protected against impacts or cutting rejection Serial assembly with Y-knives

Abrir la página 1 del catálogo

Mud scraper on rotor to avoid grass jam Back roll: Bearings and lubrificators protected Assembly poulley eccentric ring + keyway Lubrification accessible Anti-intrusion roll fairing Light to visualize the tension Opening to press belts with screw driver Lubrification accessible Idler bearing accessible

Abrir la página 2 del catálogo