CULTILINE
1 / 20Páginas

CULTILINE HR: your best partner It is no longer necessary to demonstrate the versatility of the power harrow. SULKY CULTILINE HRs push aside the references due to the quality of their crumbling performance, their ease of maintenance and their long service life. > 4 rotors per metre: impeccable seed beds so that crops can be sowed rapidly, true traction facility and fuel savings > Tines that are quickly dismantled by the centre: undoubtedly the best designed system on the market both mechanically and in terms of safety > Robustness: ø 65 mm taper roller bearings, solid coupler head, each...

CULTILINE : a look at the range Practical! The CULTILINE HRW.28 folds to make transport easy. (disc tools) (tine tools)

45 mm thick rounded rotor shaft providing perfect load transmission in the bearing axis Bearing O-rings, in double rows, for unmatched tightness and hold over time Upper nut stopped in rotation ø 65 mm taper roller bearings mounted on the shaft, capable of absorbing heavy stresses 8 mm thick gear trough, lined at the bottom of the body to resist heavy demands Holders for quick fit-tines, through-hardened by complete heat treatment to provide very long service life 6

"Top-of-the-range" technical choices" 4 rotors per metre: up to 15% saving in traction! Slow rotation speed 3 m - 10 rotors High rotation speed 3 m - 12 rotors Traction saving Source: Bavarian Institute of Agriculture, Weihenstefan (Germany) Trial conditions for May 2004/Document No.06885: > Freshly ploughed soil (sandy clay soil) > Forward speed: 7.5 km/h > Average working depth: 9 cm > Crumbling of equivalent intensity between the 10 and 12 rotor/3.00 m designs tested. Complete trial report at www.ifl.bayern.de

Exclusive to SULKY: fast disassembling and removal of tines by the centre of the rotor Bolted tines: more accessible, you can also choose the bolted tine version (tines bolted without a nut for easy changing). Unlocking (1), removal of the first tine (2), removal of the second tine (3). Disassembling and then reassembling the tines in just 3 stages, completely safely. New 330 x 18 mm forged tines: their specific design provides just as much crumbling giving new savings in traction.

Cultiline : ready for the most intensive sites! 3 Available in fixed and folding versions, the "1000 Series" harrows are developing towards greater robustness and ease of use. 3 Solid coupler head to take seed drills with very large hoppers 4 New centralised adjustment of the packer roller completed by carbide-coated scrapers and 60 mm diameter ultra-robust bearings (more information on the rollers on Page 16) 1 Rapid adjustment levelling board 4 2 2 Extended anti-ridging side deflectors 10

TRACKER roller Model Working width Power

Folding CULTILINE HRWs: heading for productivity! Are you keen on "big widths" as well as reducing the number of runs? Then look closely at the CULTILINE HRW range. > A "280 or 360 horsepower" central gearbox. > A WALTERSCHEID "Power Line" PTO drive (lubrication only every 250 hours) fitted with a torque limiter with automatic set/reset. > Pre-equipped with "large diameter" roller packer with a view to coupling a drill bar fed by a frontal hopper at the rear later. An intermediate chassis carries the hydraulic folding; each of the two actuators has securing guiding racks. > The best argument...

CULTILINE VR tine machines: economical, compact, fast, etc. > Undercarriage supporting double beam (100 x 100 x 6.3 mm thick) providing stability at high speed. > Robust solid coupler head with side wire stays. > Maximum clearance with 3 rows of Type 32 x 12 vibrating straight tines. > Choice of roller: - packer roller - bar roller - TRACKER roller - GRAVITY roller (see pages 16-17). Main options: - Mechanical or hydraulic linkage - Non-stop track eradicator tines, depth-adjustable and retractable using a single pin - Transmission bearing for driving a fan in the SULKY pneumatic seed drill,...

CULTILINE XR*: the speedy disc tool for seedbed preparation The CULTILINE XR is a mounted cultivation tool with two rows of notched discs. It is available in 3.00 m, 3.50 m and 4.00 m versions and it is characterised by its ability to work at speeds higher than 12 km/h. > Speed is its ally: with its 415 mm diameter discs positioned in the form of an X, the CULTILINE XR module is suitable for working on mulch at speeds of between 12 and 15 km/h. > Preparation has been perfected: The soil flow is levelled by a comb harrow located just behind the two rows of discs. The roller provides soil...

550 mm packer roller: flexibility > At ease in all conditions, it is the perfect compromise between cost and technicality. > Strengthened 0 60 mm* bearings - Long spikes (clod breaking, firming and stability on slopes) - Scrapers with centralised adjustment factory-supplied with a carbide anti-wear treatment. > Retractable scraper bar providing very easy maintenance and cleaning. Clay/limestone soil Clay soil Compacted loamy soil Balanced soil Packer roller **** ***** *** ***** TRACKER roller ***** *** ***** ***** GRAVITY roller ***** **** * ***

520 mm GRAVITY roller: good performance 550 mm TRACKER roller: technicality > Powerful, even soil firming over the entire working width = optimum germination + reduction in evaporation in dry conditions All the agronomic advantages with the addition of metal durability: > Flexible rubber belts: high self-cleaning capacity allowing high forward speeds > Low power consumption > Energetic firming on the furrow = excellent rise of humidity giving successful emergence. > Metal roller without any possible deterioration even on stony soils. > Available with 12.5 cm or 15 cm inter-rows

• Linkage Cat. II or III with oscillating yokes Ensures perfect tracking of terrain undulations. (Cat. II on .14) O Hydraulic linkage - mechanical version - 1,700 kg standard hydraulic version - 2,500 kg super hydraulic version • Torque limiter PTO (8 or 21 splines) Automatic set/reset - «Powerline» version with lubrication every 250 hours (CULTILINE HR26/28/.36). Rear output PTO O Tines coated with tungsten carbide • Rotor rotation speed selector 2 positions, i.e. 4 speeds available as standard: two on the selector, plus two by changing the drive pinions. Standard on HR.26 «1000 Series» On...