Catálogos >
SUMA Rührtechnik >
SUMA Giantmix FT HY

SUMA Giantmix FT HY
1 / 2Páginas

Extractos del catálogo

2 tapered roller bearings to absorb the axial forces Mechanical seal SiC/SiC independent of rotation direction Interim bearings for the drive shaft (slide bearings) Tube length 4.0 / 5.0 / 5.5 m Tube 0 159 x 5 mm, ss304 inclusive robust tube within tube technology Sealing plate 120 x 120 cm (143 x 143), ss304 ss316 on request Sealing membranes of EPDM60 Installation up to 8 m below subtrate level, other immersion depths on request Oil inspection glass for monitoring the tightness Agitator completely manufactured in modular design Power take-off with protection for tractor operation POM protection to minimize abrasion Propeller 3-blade high efficiency propeller, dynamically balanced Adjustment range Lateral adjustment ± 30° through handspindle Tilt adjustment up to ± 30° through hydraulic cylinder Tank openings: 800 x 800 mm (plate 120 cm) Propeller HD+ 660 Propeller HD+ 580 Propeller HD+ 700 Propeller HD+ 620 Propeller HD+ 750 Propeller HD+ 660 Ex-Zone Ex-zone 2 (outside the tank) up to the PTO of the agitator and Ex-zone 1 (inside the tank) Classification mechanical components: C E II 2G Ex h IIA T1 Gb INDUSTRY BIOGAS

Abrir la página 1 del catálogo

Technical Data Subject to technical changes * Calculated via CFD simulation and validated in test basin with water © SUMA Ruhrtechnik GmbH | Martinszeiier Str. 21 | DE-87477 Suizberg As per: 2020-09 Phone: +49 8376 / 92131 - 0 | Fax: - 19 | info@suma.de | www.suma.de/en INDUSTRY BIOGAS

Abrir la página 2 del catálogo

SUMA Giantmix FT HY 1 / 2Páginas

Extractos del catálogo

Todos los catálogos y folletos técnicos SUMA Rührtechnik

SUMA Giantmix FT HY
1 / 2Páginas