of front loader and implements for models CLAAS RENAULT

DRP System ® AUTOMATIC LOADER HITCH AUTO LUBRICANT BUSHINGS IN EACH JOINT It allows secure and simple loader coupling and uncoupling. null DRC System ® AUTOMATIC HITCH FOR IMPLEMENTS Bushings in each joint, with greasers in the most problematic areas, ensure the sustainability of the whole. Fast hydraulic plugging with flat tips allowing more cleanliness and plugging with residual pressure. Only few seconds are needed to hitch or unhitch implements OPTIONS AH System ® SHOCK ABSORBER A good contort is obteined for the user as well as protection for all components during transport. SERVICE LINE...

DON'T CONTAIN - Buckets - Forks CONTAIN - Adaptation -Arms - Hydraulic installation (Electrovalve, Distribuitor or tractor remote control) - All elements for work (Cylinders, Hoses, Connections,.. etc.) - DRB standard. NOTE: Mesures given can vary according to the tractor model. Measurements were taken al 190 bar and with a weight placed on pallet fork. I Start-up power J Payload at 2,00 mts. K At max. height

CAPACITY (liters)

POTATO BUCKET STANDARD BUCKET PELICAN BUCKET Side Dump option GRAIN BUCKET SQUARE BALES FORK WRAPPED ROUND BALES GRIP (economic) WRAPPED ROUND BALES GRIP

1 - Specify exhaust pipe type (from bottom up, from top to bottom, side). 4 ■ Specify wheel measures. 7 - With original three-point, fit an upper arm. 9 - Specify if the tractor has a cab of origin. 10 - Specify if the tractor has a cab or anti-dump chassis. 16 - Specify if the tractor has a front hitch of origin. 23 - The specifiled loader model can be adapted without counterweights 31 - Supplement supply for exhaust pipe modification. 42 - Specify front wheels inside width. 61 - Specify if the tractor has Open circuit or Closed circuit. 81 - State whether it has a mud-guard.

BUSINESS NETWORK HIES ERANCJW OC E A N I Al EXPORT AMERICA / ASIA / OCEANIA Contact: Sergio Alonso Tels: +34 983 33 80 99 Fax: +34 983 37 71 60 Movil: +34 690 13 30 10 e-mail: [email protected] HEAD OFFICE AND FACTORY Pol. Ind. Valdeferrin, c/3 - Pcla. 91 50600 EJEA DE LOS CABALLEROS (Zaragoza-Espafia) Tel. +34 976 67 71 50 Fax +34 976 66 12 15 e-mail: [email protected] - www.tenias.com Authorized dealer FABRICA Y OFICINAS CENTRALES Pol. Ind. Valdeferrin, c/3 - Pcla. 91 50600 EJEA DE LOS CABALLEROS (Zaragoza-Espana) Tel. +34 976 67 71 50 Fax +34 976 66 12 15 e-mail: [email protected] - WWW.tenias.com...