Smartrac
1 / 6Páginas

Self-propelled mixer feeder ^TRIOLIET FEEDING TECHNOLOGY

New generation self-propelled mixer feeder wagons The aspect "time" is becoming increasingly important in modern agriculture. Beside this it is important to feed as efficient as possible with minimal nutritional losses. Keeping this in mind Trioliet introduces the “Smartrac Line”. The Smartrac combines both the speed and comfort of a self-propelled machine along with the efficiency and fibre preservation of a cutting system. Thanks to the speed and ease of operating of the Smartrac, feeding more often a day comes within reach lifting the DM intake and feed efficiency to a higher level. The...

Loading The telescopic cutting-loading system cuts out the feed and transports it into the mixing chamber. After loading, a smooth and clean silage face is left behind. The Smartrac is able to load any feed, including grains and even square and round bales, in a fast and accurate way. Mixing The Smartrac is equipped with the proven Twin Stream vertical mixing auger with Trioform auger knives. The horizontal position of the Trioform knives ensures an optimum cutting performance with less resistance. The knives are self-sharpening and the special shape results in a higher strength and...

• Low fuel consumption because of the cutting system and mechanical drive • Less feed losses because of preservation of the structure from the silage and a smooth silo face • Capacity 10 m3 and 12 m3. • Suitable for low barns because of the maximum height of only 2,70 m. • High loading capacity by telescopic loading system • Cutting height up to 4,50 m. • Compact and manoeuvrable • Optimum view during loading, because of swivel chair and operation controls

Capacity 10m³ and 12m³ Wide cutting system High loading capacity due to a wide and big cutting frame Manoeuvrable machine Cutting height from 3,15 to 3,60 m • Compact and manoeuvrable machine • Quick and easy to handle compared to a tractor + trailed mixer feeder combination • Easy reversing, idea

Technical information Smartrac G: Capacity m3 Discharge Length m Width m Height m Track width m (front) Track width m (rear) Wheelbase m Cutting height max. m Cutting width m Cutting depth max. m Discharge height m Engine (diesel) kW Tires, front Tires, rear Number of auger knife positions Number of knives mounted per auger Capacity of fuel tank (L). Max. speed (km/h) Cross conveyor belt in front 7.60 2.55 3.00 2,42 2,45 4,11 4,50 1,45 0,55 0,59 56 (76) 385/65 R 22,5 (2x) 295/60 R 22,5 (2x) 10 7 140 25 Trioliet reserves the right to make changes in design and specifications, or to add new...