STRIP FRESHENER™
1 / 24Páginas

2984-150STRIP FRESHENER™ OPERATOR MANUAL PARTS IDENTIFICATION 2565-963 REV A 12/2019 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com

You've just joined an exclusive but rapidly growing club. For our part, we want to welcome you to the group and thank you for buying a Yetter product. We hope your new Yetter products will help you achieve both goals-increase your productivity and increase your efficiency so that you may generate more profit. This operator's manual has been designed into four major sections: Foreword, Safety Precautions, Installation Instructions and Parts Breakdown. This SAFETY ALERT SYMBOL indicates important safety messages in the manual. When you see this symbol, be alert to the possibility of PERSONAL...

SAFETY PRECAUTIONS A brief description of signal words that may be used in this manual: CAUTION: Used as a general reminder of good safety practices or to direct attention to unsafe practices. WARNING: Denotes a specific potential hazard. DANGER: Denotes the most serious specific potential hazard. CAUTION Consult your implement and tractor operator’s manual for correct and safe operating practices. Be aware of towed implement width and allow safe clearance. CAUTION: SAFETY SIGNS Safety decals are placed on the implement to alert the operator and others to the risk of personal injury or...

2984 Series Strip Freshener™ STANDARD FEATURES FOR ALL MODELS * Operating Speeds at 6-10 mph and 2t+-4i’ deep * Blade ijnangemunl and rolling basket conditions existing strips to warm arid condition planting /tine • Features parallel linkage U> follow field Contour and easy adjustments • FI as universal mounting bracket lo lit 4" x 4", 4T’x G”, G”k 6”, 51Tx 7” and 7”x 7” toolbars • Front bracket enables mounting existing planter attachments for more options • Photo shown with Optional 29*67-029A-ST-FW. See naae 14 * Optional fertilizer attachments available * Order manual: 2565-96.1

Adjustable arm linkage for toolbar frame heights between 22-26” Can run any style row cleaner in front of the row unit Single tillage coulter cleanly cut residue without hair pinning, Optional fluted coulter, smooth coulter, or Shark Tooth Wheel Two Shark Tooth wheels run at an angle to churn dirt for optimal seed bed Optional fertilizer injector Heavy Duty Rolling basket gauges the depth of the row unit. Model Options: • Able to utilize Cutting Ripple Coulter, Shallow Wave Coulter , or Shark Tooth Wheel • 3 models: 2984-150-ST, 2984-150-SW (2571-162), & 2984-150-R (2571 161) • 9 degree...

BOLT TORQUE Mounting bolts and hardware All hardware is Grade 5 unless otherwise noted. Grade 5 cap screws are marked with three radial lines on the head. If hardware must be replaced, be sure to replace it with hardware of equal size, strength and thread type. Refer to the torque values chart when tightening hardware. Important: Over-tightening hardware can cause just as much damage as under-tightening. Tightening hardware beyond the recommended range can reduce its shock load capacity. The chart below is a guide for proper torque. Use it unless a specified torque is called out elsewhere...

OPERATION PRECAUTIONS STOP Read this before using the Yetter product. - MACHINE OPERATION IMPORTANT: failure to properly set the planter frame height and levelness can result in less than successful operation of the Yetter product and may result in damaged equipment. All operators should read and thoroughly understand the instructions given prior to using the Yetter product. NOTE: DO NOT use this product if the planter is not adjusted properly! Leveling the planter: With the frame lowered to proper operating height (Usually 22”-26”) Check to be sure the toolbar is level side to side. Check...

A CAUTION: To help prevent serious injury or death to you or other caused by unexpected movement, service machine on a level surface. Lower machine to ground or sufficiently lock or block raised machine before servicing. If machine is connected to a tractor, engage parking brake, place transmission in PARK, shut off engine, and remove the key. If machine is detached from a tractor, block wheel and use shop stands to prevent movement. A CAUTION: Do not clean, lubricate, or adjust a machine while in motion. Use grease based on NLGI consistency number and the expected air temperature range...

ITEM PART # DESCRIPTION QTY 1 2984-238 FERZ TUBE HOLDER STRIP TILL W.A. 1 6 2984-446 STRIP FRESHENER LIQ TUBE 1

PARTS IDENTIFICATION 2984-086-L LEFT HAND LIQUID FERTILIZER TUBE KIT

ASSEMBLY 2984-086 LIQUID FERTLIZER KIT

Yetter Farm Equipment Co PO BOX 358 109 S. McDonough Colchester, IL 62326-0358 Phone: 309-776-4111 Toll Free: 800-447-5777 Email: info(5>vetterco.com For updated models and manuals visit the Yetter website www.yetterco.com © Yetter Farm Equipment Co. All Rights Reserved 2565-963_REV_A • 12/2019