BIOGAS Components
1 / 12Pages

BIOGAS COMPONENTS VERTICALLY STIRRED HIGH PERFORMANCE DIGESTERS BIOTANK SYSTEMS CONVENTIONAL FLAT DIGESTERS SECONDARY DIGESTERS DIGESTATE STORAGE

OUR KNOW-HOW Based on 50 years of experience in bolted steel tank construction and 20 years of experience in biogas technology, FARMATIC has developed a wide range of high quality components for biogas plants. FARMATIC Anlagenbau GmbH offers solutions at the highest technological level. We employ strict quality control in accordance with ISO standards as well as external quality assurance by Institutes for Material Testing. This ensures a consistently high quality of each component, a long service life and cost effectiveness of our products. Make use of our knowhow - from engineering all...

BASIC PACKAGE UPGRADING OPTIONS DIGESTER TANK The CSTR-DIGESTER features an insulated, cylindrical bolted steel tank in the optimal ratio of height to diameter of 1 : 1 - hydrostatic level metering - capacitive overflow protection - temperature sensors and control in - tank and circulation lines - foam detectors - gas pressure meter - cable ducts - Segmented bolted steel tank (steel panels are made from either glass-fused-to-steel (GFS) technology or with a factory-applied powder coating) - ank insulation with an external cladding in T RAL colours - Flange connections (position of choice) -...

vertical stirrer internal piping stainless steel roof pressure relief valve measurement instruments inspection windows spiral staircase heat exchanger manhole bolted steel panels Bobcat entry weather-proof cladding

BIOTANK SYSTEMS OUR MODULAR BIOGAS TANK SOLUTION FARMATIC BIOTANK SYSTEMS are available in modular and scalable models, ranging from DIGESTATE STORAGE and SECONDARY DIGESTER solutions all the way to complete CONVENTIAL BIOGAS DIGESTERS. Our conventional digesters with double membrane covers are the optimal cost-effective solution for smaller biogas projects. Our BIOTANK SYSTEMS are based on our segmented bolted steel tank technology using corrosion-resistant, specially coated steel panels. This design allows for scalable sizes and easy tanks size upgrades in the future. The factory-applied...

CONVENTIONAL DIGESTERS SECONDARY DIGESTERS DIGESTATE STORAGE The digesters and secondary digesters (post-digesters) are covered with a self-supporting A double membrane roof that serves as a gas holder. A center column made from stainless steel provides stability. The inner membrane consists of a polyethylene fabric covered by PVC/PU on both sides. The external membrane made from polyester fabric is coated with a flame retardant and PVC finish in accordance with DIN 4102 B1. A centrifugal air blower maintains a constant pressure for the roof construction. Highly efficient side-entry...

THE FOUNDATION OF OUR SUCCESS GLASS-FUSED-TO-STEEL (GFS) TANKS Our efficient digester systems are based on FARMATIC bolted steel tanks. Each steel panel is factory-tested and highly resistant to corrosion and abrasion all the while possessing superior structural properties. CSTR-DIGESTER systems with volumes exceeding 6.000 m³ are constructed from high-strength steel with a proprietary epoxy-based powder coating. The tank wall in the gas zone of CSTR-DIGESTERS and BIOTANKS consists of especially hardened glass-coated steel or stainless steel panels. The variety of construction materials...

EFFICIENT TECHNOLOGY Tank assembly FARMATIC digesters with volumes up to 15.000 m³ can be assembled in record time without the need for extensive scaffoldings or crane works. First, one ring segment is completed on the foundation slab. Once completed, the ring segment is lifted up by means of a special jack system and the subsequent ring is assembled underneath. This method allows for extremely short construction times and maximum work safety. FARMATIC digester systems are also suitable for hybrid installation. The topmost rings that are in contact with the corrosive biogas and the...

Amount of ring segments sheets/ ring green numbers = optimal size for the CSTR-DIGESTER Tank sizes up to 70 m diameter and 20 m height are available upon request Type labels: diameter/height e.g. Type 56/20 corresponds to Ø = 17.07 m / h = 5.67

FARMATIC Anlagenbau GmbH celebrated 50 years of excellence in tank construction in 2013. As early as 1990, FARMATIC became the pioneer of large scale biogas technology. Our consequent quality management, our dedication to detail and our technical innovations make FARMATIC the internationally sought-after partner for biogas plants. FARMATIC offers efficient solutions for a clean environment. YOUR TECHNOLOGY PARTNER STORAGE SOLUTIONS FARMATIC is one of the leading providers of bolted steel tanks made from glass-coated steel. Due to the modular design, we can offer you individual storage...