Pivot
1 / 16Pages

THE PIVOT Central Unit - Height of the central unit : 3,90 m. - Tie truss angle : 40 x 40 x 5 (ø 114, ø 127, ø 141) 50 x 50 x 5 (ø 127, ø 141 ,ø 168, ø 193, ø 245) - Available inlet for fertilization on the low elbow (tapped and 1’’). - Waterproof (tight) polyester main control panel reinforced fiberglass. - Double door to prevent condensation, complies with european norms. - Structure legs in 70 x 70 x 7 (ø 114), 80 x 80 x 8 (ø 127, ø 141) and 100 x 100 x 10 (ø 168, ø 193, ø 245). Pivot Diameter Feeding Pipe Diameter Maximum Output* Central Unit’s Equipments COLLECTOR The waterproof...

THE PIVOT Control Panel Panel L Type - Waterproof (tight) polyester main control panel reinforced fiberglass - Outside dimension 645 x 435 x 250 - Degree of protection IP 55 (Manufacture Telemecanique) - Double door with painted sheet polyrethane - On / Off switch - Voltage Indicator - Time (hour) meter - Timer switch with value displayed in % - With water / without water running switch - Front / Back / Auto running switch (Pivot sector) - Safety indicator and push-button to remove security process PANEL L TYPE Electronic Panel L Type This electronic control panel is compatible with all...

Irrifrance has chosen such a conception for its strenght. The V angle structure enables an uniform distribution of the charge all along the span. All parts of the structure such as pipe, angles, frame stabilizers and base beam are hot galvanized. The new conception of the truss rod with forged extremity guarantees a very easy installation, and high strenght. Antitheft prevention kit of electric cables To prevent thefts of electrical cables of power supply for motors. Irrifrance developped a new protection to secure your global installation. Contact Irrifrance for further information.

- A «cardan» type U joint is used as a connection between 2 spans. Oversized, it is able to absord irregularities of the ground. - Dual-lips Gasket boot included between two half aluminium couplings. Assuring an integral path of the waterflox, an easy gasket dismantling and a protection against UV. COUPLING An articulated connecting stainless steel rod with cam and safety switch ensures a perfect alignment, and a thermal and magnetic protection controlling electric motors according to European safety rules. TRANSMISSION SHAFTS WHEEL GEAR BOXES UMC 740 Well protected, they are purposely...

THE PIVOT IMS : Irrigation Management System - Managing irrigation from pivot control panel. - Managing irrigation from computer (software). - Monitoring and control (start, stop, reverse etc.) of up to 99 central pivots. - Remote overview of the pivots on a map with multiples views user interface. - Remote control of irrigation parameters (speed, rate, etc...). - Management of up to 20 sectors with different schemes of irrigation (rate, fertilizers application, end gun, start/stop, overhand start/stop, etc... - Text message notifications for critical status changes. This system is based on...

THE PIVOT Mobile Pivots TOWABLE PIVOT ON WHEELS A technical solution to optimize your Irrifrance Pivot. It irrigates like a centre pivot but moves from one position to the next (without tractor) like a lateral move, conveniently driven by an electric guidance box. The central unit of the multicentre is supported by 2 swing-out wheels which enable easy and safe frequent moves. This machine is easy to adapt to different field configurations and sizes as well as to different crop growing techniques. Towable Pivot This system which enables the pivot to be towed lenghtwise is particulary...

THE LATERAL MOVE Irrifrance Lateral Moves RM 2 RM 2 D RM 2 - 4 RM 2 - 4 L

CART CONTAINING - 1 axle with 1 UMC gear-motor + 2 wheel gearboxes UMC. - 2 wheels 14,9 x 13 x 24 - 1 pulling system of PE hose and power feeding cable. - 1 hydraulic feeding with swivelling elbow (no necessary operating at inversion). - 1 stop system at the end of the plot and automatical reverse. - 1 main control panel. RM 2 - 4 CART CONTAINING - 1 axle with 1 UMC gear-motor + 2 wheel gearboxes UMC. - 4 wheels 14,9 x 13 x 24 fitted on articulated system to increase the ground sticking - Possible hydraulic feeding by both sides of axle. - Liquid filling (ballisting) increased by the water...

THE LATERAL MOVE RM 2 - 4 L CART CONTAINING - 1 axle with 2 UMC gear-motor + 4 wheel gearboxes UMC. - 4 wheels 14,9 x 13 x 24 fitted on articulated system to increase the ground sticking - 1 large axle allowing the installation of the generator and diesel fuel or fertilizer tank. - 1 double hydraulic feeding of the spans to allow their installation on each side of the drive unit. - 1 hydraulc feeding with swivelling elbow (no necessary operating at inversion). - 1 stop system at the end of the plot and automatical reverse. - 1 main control panel. - 1 axle with 2 UMC gear-motor + 4 wheel...

CART CONTAINING - 2 half axles (stub axle) with 2 gear-motors UMC + 4 gearboxes UMC. - 2 half axles with 4 gear-motors UMC. - 4 wheels 14,9 x 13 x 24 - 1 swivelling head. - 1 hydraulc feeding with swivelling elbow (no necessary operating at inversion). - 1 main control panel. CART CONTAINING - 2 half axles (stub axle) with 2 gear-motors UMC. - 2 half axles with 4 gear-motors UMC + 4 gearboxes UMC. - 4 wheels 14,9 x 13 x 24 - 1 swivelling head. - 1 hydraulc feeding with swivelling elbow (no necessary operating at inversion). - 1 main control panel.

THE LATERAL MOVE RM 4 T CART CONTAINING Swivel Model - 2 half axles with 4 gear-motors UMC + 4 fixed gearboxes. - 1 swivelling head. - 1 hydraulc feeding with swivelling elbow (no necessary operating at inversion). - Variable camber. - Orientation (turning) of the wheels by electric drive. - 1 main control panel. RM 4 TD CART CONTAINING Swivel and Towable Model - 2 half axles with 4 gear-motors UMC + 4 fixed gearboxes and declutchable. - 1 swivelling head. - 1 hydraulc feeding with swivelling elbow (no necessary operating at inversion). - Variable camber. - Orientation (turning) of the...