R5 Rotator
1 / 4Pages

{{requestButtons}}

Extraits du catalogue

R5 Rotator - 1

The R5 is part of the Nelson Rotator® family of sprinklers.

Ouvrir le catalogue en page 1
R5 Rotator - 2

is a completely different micro sprinkler. • Uniform distribution • Greater throw radius • Better soil infiltration • Low pressure operation • Reliable start up Rotator® Technology Plate Standard Nozzle Nozzle (Standard): #35 Orange #40 Blue #45 Purple #50 Green #55 Yellow #9836-XXX* Plate: Green = 1 Wine = 2 Blue = 3 Handy Pocket Guide SAVE WATER, SAVE ENERGY and do a better job of irrigating. rotator® technology FULL COVERAGE IRRIGATION FOR TREE & VINE CROPS — the facts. Copyright © 2008 Nelson Irrigation Corporation Flow Control Nozzle quick thread connect to FT-02, FT-03 feedtube...

Ouvrir le catalogue en page 2
R5 Rotator - 3

These versatile stake mounting options feature durable, UV and kink resistant flexible PVC tubing. Fast, simple installation. See the Nelson Rotator® Feedtube Assemblies brochure for further details. y2 pvc-4 for 4 mm Tubing Female Acme x R5 Adapter #10616 PVC Stake Adapter (Gray) #11258 1/2" PVC Pipe 4 mm Tubing Options1 1/2 PVC-4 Stake and Tube Assembly Options

Ouvrir le catalogue en page 3
R5 Rotator - 4

‘Always use the recommended pressure for each nozzle/plate combination. The absence of flow data on the above chart for a particular plate/nozzle combination indicates the pressure is outside the recommended range. FILTRATION & NOZZLE CLEANING NOTE: 75 mesh or finer filtration is suggested. The plate and nozzle of the R5 should not be removed. Any attempt to do so will likely cause permanent damage. Nelson 5FC Flow Control Nozzle The R5 is available with a standard or flow control nozzle. The 5FC nozzles illustrated below are operating at the I same flow. As pressure increases, 5FC nozzles...

Ouvrir le catalogue en page 4

Tous les catalogues et fiches techniques (PDF) Nelson Irrigation Corporation

  1. Rotator® R5

    4 Pages

  2. NELSON VALVES

    16 Pages

  3. MR-MRDC-MDC

    2 Pages

  4. Série 3030

    2 Pages

  5. PART-CIRCLE

    4 Pages

  6. TRASHBUSTER

    2 Pages

  7. S10 SPINNER

    2 Pages

  8. D10 SPRAY

    2 Pages

  9. R55VT

    2 Pages

  10. Irricad Pro

    4 Pages

  11. MP Rotator

    8 Pages

  12. TWIG

    4 Pages

  13. P85AS

    2 Pages

  14. Regulation

    2 Pages

  15. R 2000

    8 Pages