Dust Extraction System
1 / 2Pages

Ajouter à mes favoris

{{requestButtons}}

Extraits du catalogue

Dust Extraction System for Intake Pits The purpose of the PETKUS Dust Extraction System for Intake Pits is Construction: to minimize the dust during the filling of the intake pits. The Dust Extraction System for the Intake Pits is installed in modules. Every module is equipped with a fan and exhaust silencer for aspirating Advantages: the air. Bag filters made of polyester clean the air inside the module. Individual and independent modules The modules can be extended from 8 m to 18 m. Optionally extendable Large filter areas with high airflow Standard Equipment: Immediate installation on or next to the intake pit Bolted housing made of galvanized sheet steel A dust collection system is not required Fan with exhaust silencer Description: The dusty air which is created during grain unloading is aspirated by Options: the fans of the intake pit Dust Extraction System. A bag filter separates Model in galvanized sheet steel the dust and the cleaned air is returned into the room. The bag filter is cleaned with compressed air and the dust is guided to the intake pit. Therefore, a dust collection system is not required. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E

Ouvrir le catalogue en page 1

Dust Extraction System for Intake Pits Size of one modul: 2 m (optional 500 or 1 000 mm) Pressure for pneumatical filter cleaning: 6-7 bar Intake pit aspiration system Length Air volume Filter area Electrical power fan Electrical power, inclusive compressor Air pressure volume Electrical power, compressor Technical alteration reserved. PETKUS Technologie GmbH | Roeberstrasse 8 | 99848 Wutha-Farnroda | Germany | Phone:+49 36921-98 0 | E-m

Ouvrir le catalogue en page 2

Tous les catalogues et fiches techniques (PDF) PETKUS Technologie GmbH

1. 

   Pendulum Bucket Elevator PB 400

   2 Pages

2. 

   Optical sorter OS T roeber

   3 Pages

3. 

   Universal Cleaner F 12 / P 12

   2 Pages

4. 

   Pre-Cleaner V 12 / V 15

   2 Pages

5. 

   PETKUS K-Series

   3 Pages

6. 

   Universal Cleaner U 12 / U 15

   2 Pages

7. 

   Indented Cylinder ZK / ZL

   2 Pages

8. 

   Continuous Flow Dryer DW

   2 Pages

9. 

   Gravity Table G f-series

   2 Pages

10. 

    Gravity Table Type G 20

    2 Pages

11. 

    Gravity Tables Type G 30 / G 40

    2 Pages

12. 

    Buffer Silo Type VS

    2 Pages

13. 

    Smooth Wall Silo GWS

    2 Pages

14. 

    Profile Wall Silo Type PWS

    2 Pages

15. 

    Troughed Chain Conveyor Type TK 400 / TK 520

    2 Pages

16. 

    Trough Chain Conveyor Type TK 200 / TK 300

    2 Pages

17. 

    Trough Belt Conveyor MB 300 / MB 400

    2 Pages

18. 

    Bucket Elevator Type BE 370 / BE 660 / BE 900

    2 Pages

19. 

    Bucket Elevator Type BE 130 / BE 180 / BE 280

    2 Pages

20. 

    Bucket Elevator Type BE 100

    2 Pages

21. 

    Continuous Flow Dryer DWU

    2 Pages

22. 

    SE 03

    2 Pages

23. 

    Storage and Buffer Silo

    2 Pages

24. 

    Smooth Wall Silo

    2 Pages

25. 

    Wall Silo PWS

    2 Pages

26. 

    MultiCoater CM 100

    2 Pages

27. 

    Chemical Mixer Type 200

    1 Pages

28. 

    Continuous Flow Dryer DD

    2 Pages

29. 

    Indented Cylinder ZA

    2 Pages

30. 

    A-cleaner

    2 Pages