Catalogues >
Valmetal >
V-MIX

V-MIX
1 / 8Pages

Ajouter à mes favoris

Extraits du catalogue

THE SOLUTION FOR HIGH FIBER CONTENT TMR

Ouvrir le catalogue en page 1

ULTRA RESISTANT Auger made of Abrasion Resistant steel THE FASTEST AND MOST EFFECTIVE ON THE MARKET V-Mix can cut and mix a wide variety of products including large round bales, square, baleage or dry. Characteristic Fully welded tub ¼’’ (6 mm) thick Tower style planetary gear box ¾’’ (19mm) thick floor Left, right, front, rear unloading door Tungstene carbide coated auger knives for a greater lifespan 540 RPM PTO shaft with shear bolt (also available at 1000 RPM) Chute with magnet Tungsten carbide coated auger knives (standard) Heavy-duty independent trailer MOBILE V-MIX CAPACITY WITH...

Ouvrir le catalogue en page 2

The Valmetal V-Mix is versatile enough to handle any kind of recipe. Valmetal is manufacturing more V-Mix mixer models than it is possible to showcase here. The V-Mix was designed to accommodate any future requirements Valmetal Abrasion Resistant augers offer a surprising mixing capacity, due to their unique shape, creating a homogenous mixture without damaging the ingredients. HEAVY DUTY TRAILER The V-Mix is welded on a heavy-duty trailer specifically designed to support heavy loads, providing optimum results and long lasting performance.

Ouvrir le catalogue en page 3

AVAILABLE SINGLE PHASE MOTORS OR UP TO 75 HP TRI-PHASE MOTORS Options 2 speed gear-box (with optional electric shifter) Electric door opening system (optional) PTO drive kit (in case of power failure) STATIONARY V-MIX CAPACITY WITH RUBBER EXTENSION WEIGHT (LBS/KG)

Ouvrir le catalogue en page 4

THE SECOND GENERATION OF TMR VERTICAL MIXERS CAPACITY WITH RUBBER EXTENSION WEIGHT (LBS/KG)

Ouvrir le catalogue en page 5

CAPACITY WITH RUBBER EXTENSION

Ouvrir le catalogue en page 6

CUSTOMIZE YOUR V-MIX We have the model that fits your needs. 255/70R22,5L 8 tandem wheels (Fatmix 1130 et 930) OPTIONS RUBBER EXTENSION (12’’) (30,5 CM) 2 SPEEDS GEAR BOX AVAILABLE ON ALL MODELS OPTIONAL CONVEYORS FOR UNLOADING • Lateral unload conveyor (standard lengths of 48’’ to 72’’) • Front unload conveyor »» Lateral movement of the front conveyor (side shift) »» Fixed or adjustable inclined section (various lengths)

Ouvrir le catalogue en page 7

AUSSI DISPONIBLE MANY OPTIONS ARE ALSO AVAILABLE ON AUGER MIXER: • A second push arm • Addition of a “kicker” to improve the unloading • Additional knives Les caractéristiques, descriptions illustrative material in thisprécises qu’il était possible de les avoirthe time of publication, but aresont sujettes à modifications sans préaAUGER. Les illustrations peuvent inclure Specifications, descriptions and et illustrations sont aussi literature are as accurate as known at au moment de l’impression et subject to change without prior notice. Illustrations may include optional equipdu matériel...

Ouvrir le catalogue en page 8