Fendt X and P-Series
1 / 19Pagine

Fendt X/P-Series

Fendt 8380 P 8380 P AL 8410 P 8410 P AL 9490 X 9490 X AL * Maximum power including boost Technology for the future challenges in agriculture. The combines in the new Fendt X-Series and P-Series offer a selection of high-performance combines for farms that require power, reliability and the highest level of technology. The new models are tailored precisely to the needs of large-scale agricultural farms and contractors, where the focus is on operating costs and machine efficiency.

A premium workplace for a long day’s work. The operators’ working conditions are the key to achieving maximum performance. Perfect visibility and control elements in the right place reduce operator stress and increase productivity. Intuitive menus in the Varioterminal 10.4-B provide information, which can be viewed and understood with one glance. Additionally, electronic safety systems protect your investment. Special lamination on the front windscreen enables perfect isolation and ensure a low noise level in the cab. 4

The two-part wide-angle mirror provides an excellent view to the sides of the machine Best visibility to the crop elevator enables fast mounting/removing of the table Direct view to the unloading auger My home for long work days. The work place The Fendt Skyline cab offers plenty of space and room for your well-being. Through the innovative design of the combine, visibility to the most important areas, such as the unloading auger, stubble and table is optimal. There is also excellent visibility towards the rear using the electrically adjustable, heated mirrors or the standard specification...

1 Reel speed 2 Reel lift/lower Reel forward/back 3 Header stop 4 Table lift/lower Table left/right 5 Unloading auger in/out 6 Grain tank unloading on/off 7 Automatic cutter height control 8 VarioGuide activation 1 Threshing cylinder speed 2 Concave spacing Speed separation rotors (only X-Series) 3 Blower speed 4 Opening upper sieve / opening lower sieve 5 Chopper spreading pattern 6 Grain tank open/close Grain tank unloading speed 7 Rape knives on/off 8 Transport mod / VarioGuide Standby 1 Engine speed 2 Threshing unit on/off 3 Table on/off 4 4WD on/off 5 Immobilisation brake on/off FENDT...

FENDT VARIOTRONIC Your intelligent assistant. Fendt Varioterminal 10.4-B With the Varioterminal 10.4-B, Fendt also sets the standards for optimum menu navigation and acrossrange operating interface in harvesting machinery. The Varioterminal 10.4-B is located in perfect view and well within reach. It provides all relevant performance data and settings of your Fendt combine. With the touchscreen monitor, you can check and adjust machine settings quickly and easily. All in one terminal With the Varioterminal 10.4-B, Fendt puts all functions together in one terminal. Whether you are adjusting...

INTEGRATED INFORMATION AND AUTOMATIC STEERING SYSTEMS Start with your fingertip. VarioGuide – always on track The optional VarioGuide uses the latest technologies to guide your machine precisely through the crops. This gives you higher threshing performance by reducing unnecessary passes and optimising the field division. The integrated system is adjusted in the Varioterminal 10.4-B with just a few clicks. Various upgrade stages offer accuracy in the standard range +/- 20 cm, in the precision range of +/- 5 cm and in the RTK range with +/- 2 cm. VarioGuide allows operators to get the best...

The optional rapeseed auger increases the crop flow to the crop elevator in high crops and enables an increased throughput rate. Two side knives complete the equipment for oilseed rape harvesting. The Schumacher cutterbar enables a uniform, high cutting speed for maximum performance over a 10.70-metre width. In this cutting width, the two-sided knife drive guarantees maximum reliability in comparison to cutterbars that are driven on only one side. The standard multi-coupler permits fast turnarounds when changing fields. The Schumacher cutterbar is the best in the industry. With 1,220 cuts...

The large threshing cylinder is fitted with additional weight bars, which give it very high inertia. The result is uniform threshing of the crop. Threshing already starts at the pre-concave threshing bar. The rugged concave has gentle threshing action in the front area and high separation capacity at the rear thanks to the different wire spacings. For effective separation of residual grain, the crop is diverted from the beater to the rotary separator. THRESHING AND SEPARATING WITH THE FENDT P-SERIES Threshing with separation through straw walkers. 600 mm wide high-inertia threshing drum The...

The large threshing cylinder is fitted with additional weight bars, which give it very high inertia. The result is uniform threshing of the crop. The pre-concave extension gently starts the threshing process and increases the efficiency of the concave. The distance between the concave and cylinder has been increased to match the massive throughput capacity of the machine. It can be set to 40 mm to permit fast and efficient crop flow through the threshing unit. THRESHING AND SEPARATING WITH THE FENDT X-SERIES Threshing with separation through rotors. HyPerforma threshing unit for better...

CONSTANT FLOW Up to 15 % increase in output with Constant Flow Easy to operate Fendt Constant Flow is easily activated with the multifunction joystick. Two sensors in the drive for the threshing unit continually monitor the load on the unit. Constant Flow enables perfect utilisation of the threshing unit through the automatic adjustment of harvesting speed relative to the quantity of crop in the threshing unit. High output available at all times The key to high machine performance is that the threshing unit is always completely and uniformly filled. If the crop becomes thinner, the machine...

For the 9.20 m and 10.70 m wide tables, you can equip your Fendt machine with the optional Maxi Spread radial spreader (only X-Series). The two discs ensure uniform spreading of the chopped material over the entire working width. The speed of the discs and therefore the working width can be easily adjusted independent of each other from inside the cab. The high-performance straw chopper has 8 rows with a total of 108 serrated blades and has a considerably higher working speed than standard straw choppers. OPTIMAL CLEANING – STRAW MANAGEMENT Equipment features that enable maximum output....