Cataloghi >
APEM GmbH >
Q30 Series

Q30 Series
1 / 3Pagine

Estratti del catalogo

Ø30mm panel mount LED indicators DISTINCTIVE FEATURES 23.2mm coloured Fresnel lens 200 mm long wire terminations Rear epoxy sealed ENVIRONMENTAL SPECIFICATIONS • Above panel sealing tested to IP67 & IP69K • Operating & Storage Temperature Range: Operating temperature: -40 °C to +85 °C (–40 °F to +185 °F) Storage temperature: -40 °C to +100 °C (–40 °F to +212 °F) GENERAL SPECIFICATIONS • Operating voltage: 12 to 24Vac/dc • Current consumption: 30 mA (nominal across operating voltage range) • Reverse voltage protection: the indicator has no polarity • Over-voltage protection: activates at 36 V • Viewing Angle: 60° • Life Expectancy: 100,000 hours • Maximum panel thickness: 9 mm • Insulation resistance : 4,000 MΩ at 500 VDC MATERIALS • Stainless steel 316L body, PC lens, Nitrile o-ring MOUNTING • Mounting torque: 75cNm/0.75Nm

Aprire il catalogo a pagina 1

Ø30 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS LED COMPONENT SPECIFICATIONS Typical intensity (mcd) Red Forward Voltage (Vac/dc) ADDITIONNAL INFORMATION ON LED COMPONENTS • The operating voltage must not be exceeded by more than 20% as this will result in reduced life expectancy. • Luminous intensity is measured at 30mA unless otherwise stated. • Recommended usage: - Standard: Homogenous light output that is good for indoor applications. - Hyper Bright: Homogenous light output that is good for outside viewing and is daylight visible. - Super Bright: A water clear LED that is...

Aprire il catalogo a pagina 2

Ø30 mm panel mount LED indicators BUILD YOUR PART NUMBER MOUNTING HOLE BEZEL STYLE BEZEL FINISH Rear epoxy Wires Fixed Light Stainless Steel ABOUT THIS SERIES • Standard and Bi-Colour are provided in Standard wire length is 200mm, 24AWG UL1061, Red wire denotes anode (+), Black wire denotes cathode (-) for other lengths consult APEM. 3

Aprire il catalogo a pagina 3