Cataloghi >
APEM GmbH >
QRM8 series

QRM8 series
1 / 5Pagine

Estratti del catalogo

QRM8 series Ø8 mm rear panel mount LED indicators DISTINCTIVE FEATURES 5 mm flush diffused LED, standard, hyper bright or water clear Bi-color and tri-color LED options 200 mm wire or pin terminations ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating Temperature Range: -40 °C to +85 °C ( –40 °F to +185 °F) • Storage Temperature Range: -55 °C to +100 °C (-67 °F to +212 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 60° • Life Expectancy: 100,000 hours • Max Panel Thickness: 3.5 mm • Torque: 60 cNm • Insulation resistance : 4,000 MΩ at 500 VDC • Salt spray test: 96 hours (IEC 68-2-11) MATERIALS • Body: Black plated brass or anodized aluminum • Lock Washer: Spring steel • Nut: Black plated brass • Terminal Seal: Epoxy • Panel Seal: Nitrile O-ring • Wires: 24 AWG to UL1061 +0.15 8.0 0 The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be consid

Aprire il catalogo a pagina 1

QRM8 series Ø8 mm rear panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS MCD Output (all voltages) Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS MCD Output (all voltages) Forward Voltage HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS MCD Output (all...

Aprire il catalogo a pagina 2

Ø8 mm rear panel mount LED indicators BUILD YOUR PART NUMBER MOUNTING HOLE BEZEL FINISH Fixed Light Hyper Bright Green Anodized Dark Olive Anodized Black Hyper Bright Yellow Super Bright White Super Bright Orange Super Bright Green Super Bright Yellow Red/Yellow Green/Yellow Super Bright Blue Red/Yellow/ Green * please refer to the forward voltage in electrical specifications ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. • Standard wire length is 200 mm, 24 AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire...

Aprire il catalogo a pagina 3

Ø8 mm rear panel mount LED indicators REAR MOUNT - PINS TERMINALS REAR MOUNT - WIRES TERMINALS FLAT SIDE CUSTOM OPTIONS - FIXED AND BI-COLOR - LONG BODY - RIGID PINS CUSTOM OPTIONS - TRI-COLOR - LONG BODY - RIGID PCB TERMINALS FLAT SIDE To apply the above custom option, suffix the part number with the -X reference number. Example / QRM84BXXHR24AE-X0245 SILVER PIN CATHODE GOLD PIN RED LED ANODE + EPOXY FILLED To apply the above custom option, suffix the part number with the -X reference number. Example / QRM84BXXRYG24E-XO246 4 GOLD PIN GREEN LED ANODE +

Aprire il catalogo a pagina 4

Ø8 mm rear panel mount LED indicators CUSTOM OPTIONS - FIXED AND BI-COLOR - STANDARD BODY - RIGID PINS EPOXY FILLED To apply the above custom option, suffix the part number with the -X reference number. Example / QRM84BXXHR24AE-X0259 HARDWARE - CYLINDRICAL DRESS NUTS - 8 MM - BLACK PLATED BRASS HARDWARE - KNURLED DRESS NUTS - 8 MM - BLACK PLATED BRASS

Aprire il catalogo a pagina 5