ROTEX AVANT NT
1 / 12Pagine

Nuove Falciacondizionatrici che contemplano macchine monodirezionali e reversibili, in versione articolata AR e ruote sterzanti RS. Oltre alle doti di grande affidabilità e all’ottimo rapporto qualità/prezzo, le macchine sono caratterizzate da un’estetica curata e in sintonia con le linee delle ultime macchine proposte sul mercato. Estremamente versatili e affidabili, sono stati studiati per impieghi specifici in vigneti, frutteti, serre o in generale, per colture specialistiche dove le caratteristiche strutturali del trattore sono di fondamentale importanza per permetterne l’impiego in...

ROTEX AVANT NT The design philosophy underlying the new ROTEX AVANT NT project, was not to develop an alternative to the already existing haymaking machines, but to create something new: a superior technology, uncompromising safety and total construction quality. The ROTEX AVANT NT range includes light and compact-sized mowers and front-disk mower conditioners to be able to adapt them, in addition to traditional tractors, also to isodiametric tractors and special tractors designed for pasture mowing. To make the most of the potential of the new generations of tractors, more and more firms...

Superior technology for maximum adaptability. Cutting units The ROTEX AVANT NT machines are available in five versions, with a cutting range from 205 to 285 cm, with or without conditioner. The cutter bars with oil bath gears are steadfastly protected by wear-resistant slides and deflector screens in the areas where the blades cross. The highly aggressive profiled discs, made with special steel, are available in a normal version or with a handy and safe release system and fast knife replacement, without using spanners. The profile of the bars ensures better penetration into all types of...

Transmission The main transmission boxes feature gears in oil bath and are designed to operate with tractors with PTO at 540 or 1,000 rpm, both right-hand and left-hand rotations. The control support, with the gears in an oil bath, is made from spheroidal cast iron to ensure maximum resistance to stress during operation and movement, and it is situated behind the first disc to reduce the overall dimensions and facilitate the passage of the mowed forage. A free wheel and a clutch are also standard features to protect the transmission. This makes it possible to use a simple cardan joint to...

Conditioning unit ROTEX R AVANT NT are equipped with roller conditioner, rubber type for versions with 6 disks and special polyurethane resin with high size stability and high abrasion resistance for 7 disk version. The characteristic helical chevron ribbing allows the two rollers to work in an interlocking fashion, flattening the plant’s stalk to allow rapid drying and keep it intact both in terms of quality and nutritional value. The special structure of the conditioner with offset upper and lower rollers achieves a better flow of forage both at the inlet and the outlet to improve...

DustDeflector Wings The special bodywork of the ROTEX AVANT NT has not only been studied to give the machine an attractive appearance, but also to direct dust and debris generated when the machine is in operation, thereby avoiding having to stop repeatedly to clean the radiator grilles or the windscreen if the machine is used on tractors with reversible drive wheels. The efficiency of the DustDeflector Wings system is the result of a precise stylistic study which makes the clogging substances flow down the side of the machine. Tractor hitching frames The six types of tractor hitching...

Fo The hydraulic displacement (optional) allows the ROTEX AVANT NT to move transversally about 175 mm on both sides, with respect to the central axis of the third point coupling. This allows improved load distribution and enhanced tractor/mower stability especially when operating on slopes. It also becomes a practical accessory when operating in the presence of trees or on canal banks. Guards The safety guards are designed to offer maximum protection when using the machine. They can be tipped over at 65° to check – for cleaning or maintenance purposes – the mowing and conditioning devices...

TECHNICAL FEATURES "Standard" hitch with couplings cat. 1 and 2 "Standard" hitch with couplings cat. 1 and 2 for isodiametric tractors "Accord" hitch Max. width in working condition (mm) Max. width in transport condition (mm) Transmission designed both for right and left-hand turning PTO tractors Cast-iron control support Transmission with gears in oil bath Free wheel and clutch to protect the transmission Disc-holding flanges fixed on the bar for an easy inspection and maintenance Disc holding flanges with torque limiter Wear-resistant skids Baffles in blade overlap zone Hydraulic...

TECHNICAL FEATURES "Standard" hitch with couplings cat. 1 and 2 "Standard" hitch with couplings cat. 1 and 2 for isodiametric tractors "Accord" hitch Max. width in working condition (mm) Max. width in transport condition (mm) Chevrons roller conditioner, width 1800 mm (R6) e 2100 mm (R7), with adjustable pressure through torsion bar and external lever Transmission designed both for right and left-hand turning PTO tractors Cast-iron control support Transmission with gears in oil bath Free wheel and clutch to protect the transmission Disc-holding flanges fixed on the bar for an easy...

SPARE PARTS A complete range of original spare parts, guaranteed directly by the manufacturer. A team of specialists, well prepared and available to assure an efficient and resolving service. A precise certainty for the customer’s satisfaction: 2-year warranty included in the price. We recommend to use the original PowerLube lubricants. You can pay a visit to your local BCS dealer or visit our website www.bcsagri.it to discover which novelties are waiting for you! BCS S.p.A. Viale Mazzini, 161 - 20081 Abbiategrasso (Milano) Tel. +39 02 94821 Fax +39 02 94960800 E-mail: info@bcs-ferrari.it...