OperationmanualAIRSEP
1 / 23Pagine

Aggiungi ai preferiti

{{requestButtons}}

Estratti del catalogo

Operation manual AIRSEP

Aprire il catalogo a pagina 1

Principle of working of AIRSEP

Aprire il catalogo a pagina 2

1. Base module. 2. Bunker-feeder. 3. Vibration chute. 4. Main fan. 5. Fluid generator. 6. Working chamber. 7. Collector of seed fractions. 8. Turning flaps with fixing elements. a. collector of main fractions b. collector of intermediate fractions O — marketable grain and sowing grain G — feeder grain and waste ■ — besatz and waste

Aprire il catalogo a pagina 3

Loading, adjusting and turning the AIRSEP

Aprire il catalogo a pagina 4

Connect the separator on to the electric network. . Load the grain into the bunker-feeder. Fix the turning flaps in this position.

Aprire il catalogo a pagina 5

Direction of rotation of generator must correspond to an arrow after main fan switching on. You have to make changing of phase shift if you observe the wrong direction of rotation.

Aprire il catalogo a pagina 8

Crack open the shutter providing minimal feeding of an initial material.

Aprire il catalogo a pagina 10

This is the shutter of initial material feeding.

Aprire il catalogo a pagina 11

In separated chamber fix an optimum pressure by means of power regulator of the air jet generator.

Aprire il catalogo a pagina 12

The optimum air pressure in separated chamber is a feature of equal distribution of the initial material from the fifth and the second fractions.

Aprire il catalogo a pagina 13

After regulation of pressure in separated chamber you can increase a content of the initial material through opening of shutter. You have to control the quality of grain in all fractions. Grain has to correspond to your demands.

Aprire il catalogo a pagina 14

In the case of necessity increase an air pressure in separation chamber.

Aprire il catalogo a pagina 15

Needed seeds are choosing from the separated mass by means of tuning flaps. So needed quality of grain is regulated at the output.

Aprire il catalogo a pagina 16

The grain should not be in the deflection of light fractions under correct regulation of the air pressure.

Aprire il catalogo a pagina 17

Switching on and ajustment have been done

Aprire il catalogo a pagina 18

Close the shutter «Feed of corn for separation».

Aprire il catalogo a pagina 20

Switching the vibrating chute off.

Aprire il catalogo a pagina 21

Tutti i cataloghi e le schede tecniche Borghi Srl

1. 

   Prelevacampioni

   4 Pagine

2. 

   Manuale di funzionamento del AIRSEP

   23 Pagine

3. 

   airsep

   1 Pagine

4. 

   Chain conveyors

   4 Pagine

5. 

   Cooloer Freddy

   1 Pagine

6. 

   Drum cleaner

   2 Pagine

7. 

   FFB Filters

   2 Pagine

8. 

   Flights conveyors

   2 Pagine

9. 

   FTC Filters

   6 Pagine

10. 

    Hot galvanized industrial pipes

    2 Pagine

11. 

    Loading bins

    2 Pagine

12. 

    Pneumatic conveyance

    4 Pagine

13. 

    Pulitore AIR SEP

    1 Pagine

14. 

    Revolving distributors

    2 Pagine

15. 

    Revolving extracting screw

    2 Pagine

16. 

    ROL fans

    4 Pagine

17. 

    Rotary Cleaners

    2 Pagine

18. 

    Sampling probe SP-SPR

    4 Pagine

19. 

    Stainless steel piping

    12 Pagine

20. 

    Tubular screws

    2 Pagine

21. 

    Ventilation ducts

    6 Pagine

22. 

    Horizontal silos

    24 Pagine

23. 

    Corrugated sheet metal silo bins

    6 Pagine

24. 

    Burrowing unloader

    4 Pagine

25. 

    BUCKET ELEVATOR

    2 Pagine

26. 

    TN BELT CONVEYORS

    2 Pagine