2023 Low Loaders
1 / 8Pagine

Estratti del catalogo

2023 Low Loaders - 2

Tandem Axle • 9 and 16T payload • 50mm softwood sheet floor • Spring assist ramps as standard • Lockable plastic toolbox • Durbar sheeted beavertail with grip bars • Standard 700mm (2`4” wide) ramps • Adjustable binder strap ramp supports • Tie points as standard • Galvanised drawbar boot & toolbox door. • Hydraulic Brakes • Park brake • Dual LED lights to rear including number plate light and side lights • Side and Rear Reflective Tape • Sprung drawbar standard • Hose Stowage • Fixed towing Eye • 215/75/17.5 Twin

Aprire il catalogo a pagina 2
2023 Low Loaders - 3

Tridem Axle • GVW 22 and 25T • 50mm softwood sheet floor • Spring assist ramps as standard • Lockable plastic toolbox • Durbar sheeted beavertail with grip bars • Standard 700mm (2`4” wide) ramps • Adjustable binder strap ramp supports • Tie points as standard • Galvanised drawbar boot • Hydraulic Brakes • Park brake • Dual LED lights to rear including number plate and side lights • Side and Rear Reflective Tape • Sprung drawbar • Hose Stowage • Fixed towing

Aprire il catalogo a pagina 3
2023 Low Loaders - 4

Agri Forestry • 27T gross weight (3 axle) • 35T gross weight (4 axle) • Optional 32T gross version (3 axle) • Heavy duty wheel arches c/w grip bars • Hydraulic brakes • Full LED road lights • Fixed towing eye • Front & rear loading ramps • Chime bar tie points • Plated H-Beam fabricated chassis

Aprire il catalogo a pagina 4
2023 Low Loaders - 5

16T Standard Low Loader (Walmsley Tractors) (D) Plant Transporter The info contained in this DWG is the sole property of NC Engineering (Hamiltonsbawn) Ltd. ,any reproduction in part or whole without the written permission of NC Engineering (Hamiltonsbawn) Ltd. is prohibited. All welds to be continuous 6mm fillet welds unless otherwise stated. Remove all spatter Projection NC Engineering (Hamiltonsbawn) Ltd. Unless otherwise specifed DIMS 2 Killyrudden Road, Hamiltonsbawn, are in mm & tolerances are: Co.Armagh, N.Ireland BT61 9SF decimals tolerance Tel: (028) 38 871970 x. 0.5 x.x 0.1 x.xx...

Aprire il catalogo a pagina 5
2023 Low Loaders - 6

Bolt-On Bale Wedge (Cheese Wedge) Wedge Ramp Track Guides Floor Hook

Aprire il catalogo a pagina 6
2023 Low Loaders - 7

Hydraulic Jack Headboard Outrigger Storage Tray Durbar Sheeted ramps Mantis Ramps Swing Outriggers Rear steering axle Pull out marker board Forestry outriggers

Aprire il catalogo a pagina 7
2023 Low Loaders - 8

Common Options BRAKES Dual Air/Hydraulic Brakes Air only brakes Load sensing air or Hydraulic Cable Operated breakaway system NC Electric Operated breakaway system ABS complete with Susie Automatic Slack Adjusters WHEELS Various wheel alternatives available AXLES 10 stud high speed Rear Steering Axle FLOOR Longer Bed Floor Hooks Flatbed with no Beavertail or ramps (same overall length) 1.35m Wide bucket well in tail Hydraulic Beavertail OUTRIGGERS Swing out outriggers on bed or beavertail Outrigger Storage Tray c/w Boards Pull out markerboards c/w dual LED lights (4 off) Revision.04 –...

Aprire il catalogo a pagina 8

Tutti i cataloghi e le schede tecniche NC Engineering Ltd.

  1. site dumper

    2 Pagine

  2. slurry mixer

    12 Pagine

  3. HT1.0

    1 Pagine

  4. HT1.5

    1 Pagine

  5. SW3

    1 Pagine

  6. ST3

    1 Pagine

  7. SW4.5

    1 Pagine

  8. SW6

    1 Pagine

  9. ST 9

    1 Pagine

  10. ST10

    1 Pagine

  11. Link a sweep

    1 Pagine

  12. Slurry Tankers

    16 Pagine

  13. Slurry Mixers

    12 Pagine

  14. Sweepers

    1 Pagine

  15. ST190

    1 Pagine

  16. Telehandler

    8 Pagine

Cataloghi archiviati

  1. Dump Trailer

    12 Pagine