NELSON VALVES
1 / 16Pagine

Control Valves: 800 Series Valves 1000 Series Valves Air Control Valves

Premium Performance Not all valves are created equal. As a hydraulically operated sleeve-type valve, Nelson control valves are designed for reliable and efficient operation. the smooth open/close, to the ultra-accurate pressure control pilot and high flow capacity. Every Nelson valve is custom built and is functionally tested before it goes out the door. There simply isn’t any other valve with better hydraulic performance – from

CONTROL VALVE FAMILY HYDRAULIC STABILITY Nelson’s complete line of control valves maintain optimum hydraulic performance in agricultural and industrial applications where reliability is key. Solutions include zone control, pressure control, flow control, and air control. Aluminum / Cast Iron Glass-filled Nylon Continuous Air & Vacuum Relief

800 Series valves at pump station headworks. Washington, USA.

Solutions PIVOT POINT Automate center pivots with pressure and/or flow control valves to prevent water hammer and pressure fluctuations. PRESSURE RELIEF Protect the system with a pressure sustaining/relief valve that automatically opens when a pressure spike occurs. END GUN Reliable primary or secondary end gun control valves. PUMP Maintain hydraulic stability with continuous acting air vents and a pressure sustaining and/or reducing valve.

BIG GUN ® Control valves and TWIG® Wireless Controls make an automated solid set Big Gun® sprinkler system possible. Precision irrigation requires continuous acting air vents and TWIG® wireless automated hydraulic valves. Get the air out with the ACV200, and use a pressure sustaining-normally open (PSNO) valve to provide optimum backflush pressure. DRIP / LAYFLAT ZONE CONTROL FILTER STATION Accurate and stable pressure reducing valves maintain a truly constant pressure at each block for total farm uniformity.

Efficient HIGHEST FLOW CAPACITY AND LOWEST FRICTION LOSS Flow (m3/hr) 40-200 gpm 9-45 m3/hr Cv: 115 / 130 gpm Pressure Loss

Accurate STABLE, ACCURATE PRESSURE REGULATION OVER A WIDER FLOW RANGE PROPORTIONAL THROTTLING The most accurate and responsive pressure control in the industry - trusted by irrigators, proven by science. Smooth open/close and stable pressure regulation across a wide range of flows. STAGGERED OPENINGS Tapered channels for stable low-flow pressure regulation ADJUSTMENT LABEL EASY ADJUSTMENT Fine-tune the pressure by hand; no tools required Simplifies setting the regulated pressure before installation DURABLE ACCURATE AND RESPONSIVE Precision sensitivity bushing is engineered to valve size,...

800SERIES INDUSTRIAL STRENGTH The 800 Series Valve has set the standard in durability and efficiency since 1991. Used in industrial and agricultural applications alike, it is engineered for smooth open/ close and stable pressure regulation. 10-50 psi (0.7-3.4 bar) / 18-80 psi (1.2-5.5 bar) / 30-200 psi (2.1-13.8 bar) Wafer, Threaded (2”/3”), Victaulic (2”/3”) Aluminum / Cast Iron On / Off: Manual / Electric Solenoid Pressure Control: Reducing / Sustaining / Combo Flow Control: Rate of Flow / Check Primary Applications: Center pivot point and end gun, pump stations, filter stations

CENTER BARRIER JACKET CAGE FEATURES PRESSURE CONTROL FLOW CONTROL TUBING PROTECTION Slow-fill pipelines with Rate of Flow control Protect against rodents and coyotes.

1000SERIES ENGINEERED ACCURACY The 1000 Series excels in zone control where precision regulation and energy efficiency are critical. The single-cage design is resistant to plugging and is easy to clean. 10-40 psi (0.7-2.8 bar) / 18-80 psi (1.2-5.5 bar) / 30-150 psi (2.1-10.3 bar) Wafer, Threaded, Victaulic, PVC Socket Glass-filled Nylon On / Off: Manual / Electric Solenoid Pressure Control: Reducing / Sustaining / Combo Primary Applications: Zone control, filter stations, pivot point, end gun

JACKET SPACER FEATURES PRESSURE CONTROL TWIG® WIRELESS Accurate 3-way plastic pilot Simple and reliable automation.

ACV 200 PROTECT YOUR INVESTMENT Entrapped air wreaks havoc on irrigation systems by causing water hammer and pressure fluctuations. Rely on the ACV200 for continuous air relief under pressure when standard air vents slam closed. 5-200 psi (0.3-13.8 bar) 2" MNPT or 2" MBSP Inlet 1 1/2" Socket Outlet Glass-filled Nylon & Polypropylene Air Relief Vacuum Relief Air Release Under Pressure APPLICATIONS Pump start up / shut down Filter stations Vent at high points Before and after control valves Big Gun® sprinkler risers.

REINFORCED SEAL PROTECTIVE DISCHARGE SCREEN SELF-CLEANING FLOAT TURBULENCE BAFFLE REINFORCED SEAL SMALL PORT Improved reliability

NELSON IRRIGATION CORPOR ATION NELSON AUSTRALIA NELSON IRRIGAÇÃO BRASIL Rua Benedita Mano Schincariol Seventeen Mile Rocks, QLD 4073 110. Mogi Mirim, SP. Brasil Nelson products are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. The manufacturer assumes no responsibility for installation, removal or unauthorized repair. The manufacturer's liability under this warranty is limited solely to replacement or repair of defective...