T4 F
1 / 16Pagine

STYLISH NEW T4F/N/V. GREAT LOOKS, BRILLIANT PERFORMANCE Offered in three widths to suit a range of specialist applications, the T4F/N/V tractor series match high power to weight ratios to best in class manoeuvrability. Key features include power outputs of 65, 78, 88, 97 and 106hp(CV), a wide transmission offering, cab or ROPS and a choice of front axles. POWERFUL AND COMPACT Powered by all-new four-cylinder engines and with the addition of the flagship T4.105 model producing 106hp(CV), the T4F/N/V tractor series offers unrivalled performance in a compact package. SPECIALIST VERSATILITY Few...

CLEAN, FOUR-CYLINDER INTERCOOLED EFFICIENCY COMPACT FOUR-CYLINDER POWER With torque as high as 425Nm and torque reserves of up to 46%, T4F/N/V tractors bring massive performance to a compact tractor package. Developed by FPT Industrial, the Tier 3 power units are smooth running, fuel efficient and quiet. Proven in existing T5000 and T6000 tractors, these engines have long service intervals to minimise operating costs.

INTERCOOLED EFFICIENCY MORE POWER AND TORQUE By cooling the engine intake air, the intercooler fitted to the T4F/N/V power units boosts combustion efficiency. This is of particular benefit in high ambient temperatures, overall fuel use and power development remaining consistent, regardless of conditions. All T4F/N/V models develop more power and greater torque at a lower engine speed when compared to the previous speciality series. The new range topping T4.105 tractor achieves an optimum fuel consumption figure of just 221g/kWh. ENGINEERED FOR 100% BIODIESEL All T4F/N/V are designed to...

A WIDE CHOICE OF EFFICIENT TRANSMISSIONS Thanks to the modular build of T4F/N/V tractors, the transmissions can be easily matched to end user needs. Advanced features include powershuttle, power clutch, park lock and creep speed options. To cope with the extra power of the new T4.105, a heavier duty clutch and stronger rear PTO driveline components are used. TRANSMISSION CHOICE 16x16 Shuttle Command™ Shuttle Command™ (optional Creeper / 30kph / 40kph) Dual Command™ (optional creeper / 30kph / 40kph) Power Clutch button + Gear change Power Clutch button POWER CLUTCH Dual command...

CREEP SPEED OPTION Creep speeds as low as 160 metres/hour are available, enabling the tractor to carry out a wide range of precision operations. These transmissions are so flexible that this same low speed can be matched to a ratio offering a 40kph transport speed. SHUTTLE COMMAND™ AND SPLIT COMMAND™ TRANSMISSIONS Entry level 16x16 Shuttle Command can be specified with a 28x16 creep speed option to deliver working speeds as low as 0.2kph. The 32x16 Split Command is similar to Dual Command but uses the clutch pedal to affect a ratio ‘split’ for a 20% reduction in forward speed. A mechanical...

OPERATOR ENVIRONMENT SMALL IN SIZE, BIG IN COMFORT DESIGNED AROUND THE OPERATOR Operator comfort is a key New Holland priority. State of the art virtual simulation technology is employed to achieve the most ergonomic layout of the cab controls. This has resulted in an all new right hand console design, grouping all main hydraulic levers together for ease of operation. Noise and vibration levels are tightly controlled, with light steering and class leading visibility over the stylish engine hood all contributing to reduced operator fatigue. BIGGER, BETTER FOOTWELLS On the smaller V/N models...

ERGONOMIC EXCELLENCE HIGH COMFORT SEAT The optional multi function electronic joystick allows the operator to control eight outlets at one time, switches on the console dictate which mid-mounted valves are to be used. The hydraulic motor operates through two additional outlets and is activated by a switch on the console and features a Lock position for additional safety. The new instrument display fitted to all T4F/N/V tractors is easy to read and understand. The new display lists valuable information including forward speed, PTO speed, low fuel and the next service interval. Fitted with a...

SPECIALIST TRACTORS FOR SPECIALIST NEEDS The modular build of T4F/N/V tractors enables New Holland to offer a broad range of specifications that exactly matches your specialised need. The standard hydraulic flow of all models is 48.6Lpm. Need more flow? Specify the Megaflow pump, and output can be increased to 63.8Lpm. T4F/N/V. Factory built to your specification. DIRECT OUTPUT, LOWER FUEL CONSUMPTION HYDRAULIC LINKAGE SETTINGS Engaged via a servo assisted control, the rear PTO on T4F/N/V tractors has a direct driveline to minimise power loss. Maximum engine power is directed to the PTO for...

ADVANCED ELECTRONIC DRAFT CONTROL FOR OPTIMUM PERFORMANCE Simple to use, EDC allows the operator to precisely set up and control implement working depths, lift height and lowering speeds. Other features include a finger tip controlled fast raise and lower switch to reduce the number of operations needed during an end of row turn. LIFT-O-MATIC™ PLUS SYSTEM: SPEED AND PRECISION Exclusively available on cab models, the award winning mechanical hydraulic control system allows you to raise or lower the rear linkage when making a headland turn, while maintaining position and draft settings. When...

UNIQUE NEW HOLLAND FEATURES FOR PRODUCTIVITY AND SAFETY SuperSteer™ front axles with Auto 4WD management and dedicated front hitch are unique to New Holland. Offering an effective steering angle of 76°, tractor with a SuperSteer™ front axle can offer a turn radius as low as 2.9m for truly outstanding agility. The way in which the axle moves as the steering lock is increased helps to reduce front wheel scrub. SUPERSTEER OFFERS SO MUCH MORE With SuperSteer you get so much more than just a tight, clean turn. Front mounted equipment turns into work sooner and the increased wheelbase transfers...

THE RIGHT FRONT AXLE FOR YOUR NEEDS VERSATILE SUPERSTEER™ FRONT LINKAGE AND PTO All T4V/N/F tractors can be specified with a choice of 2WD or 4WD front axles. T4N/F are also available with a tight turning 4WD SuperSteer™ front axle. The turn radius of the 2WD drive T4F/N/V tractors can be as low as 2.8m. The 2WD specification is available on both ROPS and cab models. T4V/F models can be specified with an axle mounted Cat I/II front linkage with quick attach couplings and 1000rpm PTO in conjunction with SuperSteer™ front axle option*. Fully integrated into the main hydraulic controls, the...