Material Handling AG SERIES
1 / 16Pagine

Scan this QR code with the camera on your smartphone to download the digital version! ■ iBucket Elevators ■ iConveyors ■lSupport Towers & Catwalks

DOUBLE RUN CONVEYORS The Sukup Double Run Conveyor causes less grain damage than a portable auger and is more efficient and economical than augers of similar capacity and length. The compact design enables smooth, quiet operation and requires minimum maintenance. Sukup makes the Double Run Conveyor with 100% UHMW paddles, which come pre-attached to the chain. We also offer intermediate discharge gates (horizontal applications only) as an option to further customize your operation. HEAD SECTION ■ ACME threaded take-up comes standard. ■ Head discharges available in 45°, 60° and 90° angles. ■...

DOUBLE RUN CONVEYORS 30° AND 45° BEND SECTION Adding a bend section to a Sukup Double Run Conveyor allows you to feed your dryer directly from your hopper bin with one simple, high capacity conveyor. The horizontal section of the conveyor fits under the hopper and is fed using a bypass inlet. This elbow allows for an incline section creating a more compact conveying system, saving you space in your drying and storing operation. ■ Available in 8”, 10” or 12" ■ 30° and 45° Bend Sections ■ Head Drive ■ Compact, helps utilize space ■ Maximizes capacity and grain quality ■ Bypass Hopper Inlet...

STANDARD FEATURESHY-FLIGHT & DRAG CONVEYORS ■ Turned, Ground and Polished Shaft Sukup utilizes a higher precision 1045 TG&P shaft that allows your entire conveyor to run smoothly. All UHMW shaft seals are 1/4" thick. ■ Removable Bearing, Sprocket and Shaft (pictured on right) The bearing, sprocket and shaft are all one removable unit on Sukup Drag Conveyors for easier maintenance. The entire assembly can be removed without having to separate the shaft from the bearings or the sprocket. Our conveyor chains come preassembled with paddles to help speed installation. They are engineered for...

STANDARD FEATURES HY-FLIGHT CONVEYORS n Center support plate at connections prevent return pan from sagging. (pictured below) n Heavy-duty bearing mounts come in 1/4" or 3/8" construction. n 11-gauge sides come standard on 13" and 17" head sections. 7-gauge sides come standard on 21" head sections. All conveyor bodies utilize 11-gauge sides. Conveyor tops are 14-gauge construction. Conveyor bottoms come standard as 7-gauge construction. n Galvanized construction on all standard conveyors. Bolted "Tongue" n Open horizontal sections for grain feed. n Modular Curve Section - If a straight...

BUCKET ELEVATORS HEAD DESIGN n Low-impact head design n Split-style hood allows for easy interior accessibility n Expanded metal-back urethane standard on 36" and larger n Tapered bushing at pulley to eliminate lateral movement n Lifting eyes are located on the hood of the elevator to ease hood n Externally mounted, assembly and removal heavy-duty pillow block bearings n Adjustable throat wiper n Bearing jack bolts for easy belt alignment n Interior lip to keep moisture out and dust in Lifting Eyes INTERMEDIATE n Our patented squaring plates and alignment pins are placed at the top and...

■ Buckets We use high-density, non-sparking, polyethylene buckets with #3 venting standard. Nylon, Urethane, and Steel buckets are optional when using highly abrasive materials. Vented #4 buckets are also available. ■ Bearings Ball Bearings come standard on head shaft sizes 3 7/16" and smaller. Sukup utilizes Roller Bearings for head shaft sizes 3 15/16" and larger. Roller Bearings are optional on all smaller bucket elevators. Split Roller Bearings come standard on 5 7/16" and larger head shaft sizes. ■ Crown-Faced Boot Pulley This comes standard with any bucket elevator. (pictured on...

Sukup Leg Support Towers are an excellent choice for supporting bucket elevators. Towers eliminate the need for guying cables that clutter your facility and eat up valuable real estate. In addition to providing the vertical support for the elevator legs, the towers can be designed to support bulk weighers, cleaners, and distributors - either inside or outside the tower. STANDARD FEATURES ■ Hot-dipped galvanized finish ■ Heavy duty ASTM A325 hardware ■ Knock-down design for economical shipping ■ Modules available in 20', 10' and 5' sections ■ Site specific and computer engineered,...

HANDRAIL TRUSS CATWALKS n Welded tubular side construction; bolt in bottom n Knock-down design for economical shipping n Hot-dipped galvanized finish n Standard 2' walkway. Full width grating available. n 4', 5', 6' wide catwalks available n 5', 8', 9', 10', and 20' sections available. Bolt together 4FT WIDE different combinations of sections to provide overall catwalk lengths in increments of 1', starting at 13'. 5FT WIDE PATENT PENDING n Pocket Connection (patent pending) provides a solid connection and easier assembly. (pictured on far right) HD Catwalk Width Clearances (from L to R) 4',...

SWEEPWAY® POWER SWEEP Sweepway® Power Sweeps are equipped with a galvanized backboard which keeps the sweep close to the floor as it propels itself around the bin. The tall backboard prevents grain flowing over the top. A patented, galvanized scraper (Patent #6,254,329) is attached to the backboard to clear the optimum amount of grain off the floor. The scraper is adjustable to different heights to meet your needs. Exclusive 16:1 reduction drive, standard on 8" and 10" Sweepways® 36' and larger. 4:1 reduction drive wheel is standard on 6", 8" and 10" for 33' diameter bins and smaller. An...

BUCKET ELEVATORSSPECIFICATIONS * Value dependent upon height ** Low Profile NOTE: Other configurations available. Pulley

DISTRIBUTORS SPECIFICATIONS ■ 45° wing-back design; heavy-duty, galvanized compact construction; dust and weather tight to reduce contamination. ■ Dense, bristle brush seal to minimize product build-up inside the distributor and leakage of product into adjacent bins. ■ Top and bottom bearing for smooth, easy operation ■ Positive locking system for precise spout positioning ■ Discharge stubs manufactured from 10 ga abrasion resistant steel ■ Hinged door for inspection and maintenance ■ Standard cable control kit ■ Internal spout bolted for easy parts replacement. Optional lined with EMB...