DRP System ® AUTOMATIC LOADER HITCH It allows secure and simple loader coupling and uncoupling. It regulates the pressure of hydraulics cylinders avoiding over pressures and unexpected breakages. Mill DRC System ® AUTOMATIC HITCH FOR IMPLEMENTS Bushings in each joint, with greasers in the most problematic areas, ensure the sustainability of the whole. DR2B System ® / DR4B System ® Fast hydraulic plugging with flat tips allowing more cleanliness and plugging with residual pressure. Only few seconds are needed to hitch or unhitch implements AH System ® SHOCK ABSORBER A good contort is obteined...

DON'T CONTAIN - Buckets - Forks CONTAIN - Adaptation - Arms - Hydraulic installation (Electrovalve, Distribuitor or tractor remote control) - All elements for work (Cylinders, Hoses, Connections,.. etc.) - DRB standard. NOTE: Mesures given can vary according to the tractor model. I Start-up power J Payload at 2,00 mts. K At max. height

CAPACITY (liters)

PELICAN BUCKET STANDARD BUCKET Side Dump option SQUARE BALES FORK CAPACITY (litros) WRAPPED ROUND BALES GRIP (economic) WRAPPED ROUND BALES GRIP

1 - Specify exhaust pipe type (from bottom up, from top to bottom, side). 4 - Specify wheel measures. 5 - Specify front axle type. 7 - With original three-point, fit an upper arm. 9 - Specify if the tractor has a cab of origin. 10 - Specify if the tractor has a cab or anti-dump chassis. 13 - Specify if the tractor has an auxiliary tank. 19 - Shock adsorber is compulsory. 22 - Specify motor type. 23 - The specifiled loader model can be adapted without counterweights. 24 - State type of chassis. 31 - Supplement supply for exhaust pipe modification. 42 - Specify front wheels inside width. 61 - Specify...

BUSINESS NETWORK HIES ERANCJW OC E A N I Al EXPORT AMERICA / ASIA / OCEANIA Contact: Sergio Alonso Tels: +34 983 33 80 99 Fax: +34 983 37 71 60 Movil: +34 690 13 30 10 e-mail: [email protected] HEAD OFFICE AND FACTORY Pol. Ind. Valdeferrin, c/3 - Pcla. 91 50600 EJEA DE LOS CABALLEROS (Zaragoza-Espafia) Tel. +34 976 67 71 50 Fax +34 976 66 12 15 e-mail: [email protected] - www.tenias.com Authorized dealer FABRICA Y OFICINAS CENTRALES Pol. Ind. Valdeferrin, c/3 - Pcla. 91 50600 EJEA DE LOS CABALLEROS (Zaragoza-Espana) Tel. +34 976 67 71 50 Fax +34 976 66 12 15 e-mail: [email protected] - WWW.tenias.com...