Cataloghi >
Trioliet B.V. >
Truckmount

Truckmount
1 / 4Pagine

Estratti del catalogo

^TRIOUET FEEDING TECHNOLOGY

TRUCK MOUNT Mixer feeder with two vertical augers HYDROSTATIC DRIVE SYSTEM Two versions are available: A. Repto The hydrostatic pump and motor have been integrated in one compact drive system, mounted directly behind the truck cab, driven by the truck flywheel PTO. B. Front bumper mount The hydrostatic pump is mounted at the front bumper of the truck and is connected directly to the crankshaft of the engine. The hydrostatic drive system is very simple. Only one variable axial piston pump and only one variable axial piston motor in combination with a planetary reduction gearbox form the...

Aprire il catalogo a pagina 2

MIXER BODIES All mixer bodies offer the Trioliet benefits like the wear rim, the horizontal flow system thanks to the off set inserts, the twin stream augers and the rounded side doors and rounded side walls on the Solomix 2, ZK (side door) bodies. Also the way the auger mountings are integrated into the bottom construction, result in a strong and rigidly built frame. A sub-frame over the full length of the mixer with weigh bars at four points enables a good connection to the truck chassis beams with all forces spread out over the whole frame. The hydrostatic drive system standardly offers...

Aprire il catalogo a pagina 3

Standard features mixing tub • Mixing tub with subframe and drive shaft for the augers • Two planetary driven vertical augers with short Trioform auger knives • 91" Wide chain conveyor with Heavy Duty chain with side-shift and flow regulation (discharge on LHS) for models VLX-K • Two side discharge doors on LHS for models ZK/ZKX. Other door positions on request • High discharge doors with rounded edges for an even and rapid discharge • Flexible and spacious side door covers • Two manual operated restrictor blades for the 2400L, four restrictor blades for the 3200 • Wear-ring • Horizontal...

Aprire il catalogo a pagina 4