1. Cataloghi
  2. Gigola e Riccardi Spa
  3. DESTRATIFICATORE ITA_ENG
video corpo

DESTRATIFICATORE ITA_ENG
1 /2Pagine

DESTRATIFICATORE ITA_ENG

DESTRATIFICATORE ITA_ENG
1 /2Pagine

Estratti del catalogo

DESTRATIFICATORE ITA_ENG-1

GigoUrDESTRATIFICATION FANSFor breeding farms, greenhouses and industriai applications NEW BENT OVER PANEL BOX The new bent over panel box provide the safety handling of the fan without getting injured. Our destratification fan is available with stainless steel case and blades, or with galvanized iron case and blades (upon request). TECHNICAL FEATURES The fan resists humidity, heat and cold (as better clarified in the use and maintenance manual). It has been designed specifically to operate in highly corrosive environments or in environments with abrasive substances. The fan shall only be used for the purpose for which it is designed and in compliance with the law. The user has the responsibility to require an adequate motor to be in compliance with local legislations. Standard shutter wall fans are equipped with one protection grid only. Local legislations may require an additional safety grid for the shutter. This may be connected to the height of the installation. The customer is responsible to check compliance with local legislations and require an appropriate grid, if needed. Please refer to the use and maintenance manual for any further clarification. GIGOLA E RICCARDI S.pA FANS VENTILATORI Headquarter and fan production plant Sede legale e produzione ventilatori 25046 Cazzago San Martino (BS) ITALY Via Alessandro Volta, 7 Tel. 0039 030 725368 Fax 0039 030 7255438 COOLING PAD SYSTEM PANNELLO EVAPORATIVO COOLING Pad production plant Produzione pannelli evaporativi 25030 Erbusco (BS) ITALY Via dell'Industria, 41 Tel. 0039 030 7242316 Fax 0039 030 7248406 [email protected] - www.gigolariccardi.it MADE IN ITALY GigoMl

 Aprire il catalogo a pagina 1
DESTRATIFICATORE ITA_ENG-2

GigoU DESTRATIFICATORE Per allevamenti, serre ed applicazioni industriali NUOVO PANNELLO CASSA RIPIEGATOIl ventilatore destratificatore è disponibile con cassa e pale in acciaio inox, oppure con cassa e pale in lamera zincata. CARATTERISTICHE TECNICHE Il ventilatore è resistente all'umidità, al calore ed al freddo (come meglio specificato nel manuale di uso e manutenzione) ed è stato progettato specificatamente per funzionare in ambienti altamente corrosivi o con sostanze abrasive. Pertanto, il ventilatore verrà utilizzato solo per gli scopi per i quali è stato progettato ed in conformità alla...

 Aprire il catalogo a pagina 2
* I prezzi non includono tasse, spese di consegna, dazi doganali, né eventuali costi d'installazione o di attivazione. I prezzi vengono proposti a titolo indicativo e possono subire modifiche in base al Paese, al prezzo stesso delle materie prime e al tasso di cambio.